cbrahs

i am going to use the jeep canister as well. no holes in the tank, no risk of water and contamination with using fuel proof RTV (which looks terrible in my opinion anyway) and it is a plug and play. I would rather spend the $92 and do it right and only take about 10 minutes to complete.

rodaniel

Hey guys, I have an '04.5 truck that originally came with the filter-mounted pump, but has since been changed to the in-tank pump. I'm with you on the Jeep fuel canister, but could I not just get a stock '04 (from filter-mounted pump) canister and put it in without brand/model jumping?

Spooler

Yes you can do that. The problem is finding one. Once they retrofit it the old stuff goes back to Dodge. That's what happened to mine.

53 willys

well I got the Airdog 150 & tank vent mod in I just filled up with a little over 36gallons in one shot
I took the truck down some steep hills on the way to fuel up...I was able to get the FP gauge to read 0 more then once but the truck never stumbled...the tank was so low the over head was flashing LOW FUEL!!!!
this was with a Vulcan drawstraw......
I will post the whole story in the morn.....

cgmorgan06

Good.....I can't wait to read it then I can get my airdog installed hopefully this weekend.

jmccart

Hey 53 ******, you did not happen to measure exactly how long you cut the hose? If I have the same exact vehicle, could I not just do the same exact cut, to the millimeter? I must say, if I was you, I probably would have got the tube to where it fits perfect and not bothered taking it out and measuring it again. Just checking.

Thanx.

53 willys

I did measure the first cut...but after that I "fine" tuned it to fit with a 1/16" thick washer (actually just a hair more then a 1/16") under the drawstaw tube..... I hope to get the write-up done tomorrow, I got busy today and could not take my last couple pics to finish everything....BTW I bought the Vulcan drawstawII and then used the airdog bulkhead fitting as a tank vent mod.....the Vulcan Drawstraw is PIMP!!!
teaser pic......

jmccart

Zowie! I can't wait. That looks friggin awesome. I really look forward to your thread. I don't want to install it before I go on a short li,l trip for 5 days a couple hundred miles from home. But when I get back I am doing fuel upgrades. Vulcan draw-straw? Sounds interesting.

53 willys

Vulcan DrawstarwII

cgmorgan06

I was hoping the full write-up would be done today by the time I got off work, but it wasn't. Guess I will just have to wait until tomorrow to read it.

53 willys

sorry, I had to take some more pics cause some of the ones I took in the shop were to dark......then I had to pick a plug up to stop my factory fuel feed line from dripping..I will explain it in the write up..

cgmorgan06

Im anxious