One Piece Rear Shaft
#1
Registered User
Thread Starter
Join Date: Jul 2006
Location: Redding, CA
Posts: 632
Likes: 0
Received 0 Likes
on
0 Posts
One Piece Rear Shaft
I had a u-joint go south on my trip this weekend at 50K miles. Since this truck has had the launch shudder since day one, I figured I would get the 08+ 1 piece shaft.
My parts guys is whining since I don't have the last 8 digs of the vin. Can one of you guys help me out? Would have to be for a Diesel, G56, quad cab, and long bed. I'm assuming 2500, 3500, and drw would all be the same?
Or does someone have a part number?
Thanks!
My parts guys is whining since I don't have the last 8 digs of the vin. Can one of you guys help me out? Would have to be for a Diesel, G56, quad cab, and long bed. I'm assuming 2500, 3500, and drw would all be the same?
Or does someone have a part number?
Thanks!
#3
Registered User
Thread Starter
Join Date: Jul 2006
Location: Redding, CA
Posts: 632
Likes: 0
Received 0 Likes
on
0 Posts
#4
#6
http://www.doghousediesel.com/catalog/i259.html
https://www.dieseltruckresource.com/...t261400p2.html
btw: this fixed all my vibes/shutters on my 2pc etc. my rear joint was out. carrier bearing was loose also.
https://www.dieseltruckresource.com/...t261400p2.html
btw: this fixed all my vibes/shutters on my 2pc etc. my rear joint was out. carrier bearing was loose also.
#7
"California Style"
I have not noticed any launch shudder and it pulls smooth like a freight train from the get go. As one might suspect, one must be carefull with damaging the large diameter aluminum shaft and throwing things out of balance though.
Thread
Thread Starter
Forum
Replies
Last Post
RWDCelicadude
3rd Gen Engine and Drivetrain -> 2003-2007
14
01-14-2010 11:17 AM
Death Dealer
3rd Gen Engine and Drivetrain -> 2003-2007
12
02-22-2008 03:58 PM
CCOUGHRAN
3rd Gen Engine and Drivetrain -> 2003-2007
11
01-04-2005 10:10 PM