3rd Gen Engine and Drivetrain -> 2003-2007 5.9 liter Engine and drivetrain discussion only. PLEASE, NO HIGH PERFORMANCE DISCUSSION!

Winter bed weight ideas

Thread Tools
 
Search this Thread
 
Old 10-23-2009, 08:43 PM
  #1  
Registered User
Thread Starter
 
iaddiesel's Avatar
 
Join Date: Nov 2005
Location: WV Panhandle (east)
Posts: 169
Likes: 0
Received 0 Likes on 0 Posts
Winter bed weight ideas

Anyone have any good ideas for weight in the bed for winter thats safe, and wont send anything through the cab in an accident or hard stop?
Old 10-23-2009, 08:48 PM
  #2  
Registered User
 
SCCSURF's Avatar
 
Join Date: Jul 2008
Location: Portland, OR
Posts: 294
Likes: 0
Received 1 Like on 1 Post
Most automotive online stores sell water bags for the bed, you fill and strap down. I just let the snow sit in the bed for weight though.

here's one.

http://www.autoanything.com/hitch-be...A2868A0A0.aspx
Old 10-23-2009, 09:18 PM
  #3  
Registered User
 
boyce's Avatar
 
Join Date: Mar 2009
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
Out here in eastern oregon you can buy sand filled bags/tubes, put them in and if you get stuck you can dump them out for traction under tires! Cheap and good. On the flip side I have never had any traction/handling issues with my pickup in the snow, it still under-steers at low speeds like a ***** in 4wd.
Old 10-24-2009, 08:41 AM
  #4  
Registered User
Thread Starter
 
iaddiesel's Avatar
 
Join Date: Nov 2005
Location: WV Panhandle (east)
Posts: 169
Likes: 0
Received 0 Likes on 0 Posts
I never got stuck, but I find that in 2 wheel the *** end has crap for traction. In 2wd I think my wifes tahao would go farther just because she has more weight over the rear axle. Most of my miles are highway and I would rather be in 2wd more than 4wd, unless absolutly needed.
Old 10-24-2009, 08:54 AM
  #5  
Registered User
 
doorguy's Avatar
 
Join Date: Aug 2005
Location: saskatoon,sk
Posts: 259
Likes: 0
Received 0 Likes on 0 Posts
In one truck we took 3/8" plate steel cut it the shape of the floor and bolted it in.Loose no bed space.
Old 10-24-2009, 09:07 AM
  #6  
Registered User
 
Kenny D's Avatar
 
Join Date: Feb 2006
Location: Fl Keys
Posts: 541
Likes: 0
Received 0 Likes on 0 Posts
back in WY some guys would shovel there walkways into the bed of the truck it worked well for them
Old 10-24-2009, 10:01 AM
  #7  
Registered User
 
FrozenAssets's Avatar
 
Join Date: Aug 2009
Location: the frozen North...
Posts: 52
Likes: 0
Received 0 Likes on 0 Posts
Sandbaggin' x2

Originally Posted by boyce
Out here in eastern oregon you can buy sand filled bags/tubes, put them in and if you get stuck you can dump them out for traction under tires! Cheap and good.
I'm a Minnsnowta sandbagger...
Come spring the bags get stacked next to the shed and the camper goes in, come fall the camper goes next to the shed and the bags get stacked in the bed of the truck. I like the bags because they don't slide around. As long as you are careful not to bust the bags open, they work great. You can even "recycle" them into the kid's sandbox as needed.

My father-in-law straps in 2-55 gallon barrels half filled with water. Once they freeze there is no sloshing around and the plow truck keeps pushin' (even in 2WD). Skinny tires and weight over the axles keeps you going through the snow.
Old 10-24-2009, 10:27 AM
  #8  
Registered User
 
Dan_K's Avatar
 
Join Date: Apr 2005
Location: Minden, NV
Posts: 412
Likes: 0
Received 0 Likes on 0 Posts
Old 10-24-2009, 10:42 AM
  #9  
Registered User
 
DirtEater's Avatar
 
Join Date: Jul 2005
Location: Okie City, OK
Posts: 848
Likes: 0
Received 0 Likes on 0 Posts
I was just at Home Depot and noticed that they're selling their orange 5 gallon buckets for $2.34, and the lid with rubber gasket seal is .99 cents. For about $3.50 each after tax, you could fill with sand, gravel or even water as long as you don't fill too high causing it to expand and crack when frozen. Cheap cheap!
Old 10-24-2009, 11:04 AM
  #10  
Banned
 
annabelle's Avatar
 
Join Date: Oct 2006
Location: NM
Posts: 2,613
Likes: 0
Received 2 Likes on 2 Posts
I bolted down 1/2 plate in a Waco ice storm one year........worked great.
Old 10-24-2009, 11:14 AM
  #11  
Administrator ........ DTR's puttin fires out and workin on big trucks admin
 
Hvytrkmech's Avatar
 
Join Date: May 2006
Posts: 2,013
Received 3 Likes on 3 Posts
I boxed in the bed with 2x10 lumber with compartments on my F350, then filled 10 5gal pails with sand/salt combo. The way I had them in the compartments held them in position for daily driving. It worked awesome and it allowed me to always have sand/salt to spread on my driveway.
Old 10-24-2009, 02:13 PM
  #12  
Registered User
 
turbo246's Avatar
 
Join Date: Mar 2007
Location: manchester, CT
Posts: 157
Likes: 0
Received 0 Likes on 0 Posts
i work for otis elevator....... counterweights make good weights are 100lbs each and easy to handle. I load it up with 5-10 for plowing and im all set
Old 10-24-2009, 02:22 PM
  #13  
Banned
 
15 Digger's Avatar
 
Join Date: Aug 2009
Location: Staten Island, NY
Posts: 376
Likes: 0
Received 0 Likes on 0 Posts
Where do you live? near me if you stop your pickup 4 or 5 Mexicans will jump in looking for work lol.
Old 10-24-2009, 04:46 PM
  #14  
Registered User
 
D-Roc's Avatar
 
Join Date: Oct 2006
Location: Cold Lake, Alberta
Posts: 676
Likes: 0
Received 0 Likes on 0 Posts
I carry 8 20L jerry cans in the back... the way they are designed, they fit four along each end of the bed, then I just bungee cord them in. They never move...
Useful and heavy!

http://www.scepterconsumer.com/auto/specialty/
Old 10-24-2009, 04:47 PM
  #15  
Registered User
 
D-Roc's Avatar
 
Join Date: Oct 2006
Location: Cold Lake, Alberta
Posts: 676
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by 15 Digger
Where do you live? near me if you stop your pickup 4 or 5 Mexicans will jump in looking for work lol.

............


Quick Reply: Winter bed weight ideas



All times are GMT -5. The time now is 07:21 AM.