What drive shaft do I have?
09-04-2010 | 03:31 PM
#1
Thread Starter
Registered User
Joined: Dec 2002
Posts: 23
Likes: 0
From: St. Augustine, FL
What drive shaft do I have?
I need to replace the U-Joints in the front drive shaft, from what I've read dodge switched from dana to AAM in 2003? I've got an early 2003 with a manufacture date of 12/2002.
Anyway to tell which one I have, I just crawled under it and couldn't find any markings other than a barcode label (Not having luck with the number on the barcode). In the glove box it just says the front is a 9.25 and rear is a 10.5.
Auto Place for Neapco replacements are:
Dana
2-4800BF (2 needed) & 2-3011BF
AAM
2-1355 (2 needed) & 2-3011BF
Any help would be appreciated.
Anyway to tell which one I have, I just crawled under it and couldn't find any markings other than a barcode label (Not having luck with the number on the barcode). In the glove box it just says the front is a 9.25 and rear is a 10.5.
Auto Place for Neapco replacements are:
Dana
2-4800BF (2 needed) & 2-3011BF
AAM
2-1355 (2 needed) & 2-3011BF
Any help would be appreciated.
09-09-2010 | 08:23 PM
#3
Thread Starter
Registered User
Joined: Dec 2002
Posts: 23
Likes: 0
From: St. Augustine, FL
Went to Napa and the parts for Precision Super Strength greaseable were #270 at the CV and #235 at the front axle if anyone else needs it. I forget the ball seat repair kit number. All fit good, no more clicking/popping.
Thread
Thread Starter
Forum
Replies
Last Post
Det 1
3rd Gen Engine and Drivetrain -> 2003-2007
17
12-22-2009 08:32 AM
4x4dually
Performance and Accessories 2nd gen only
7
01-05-2007 01:07 PM
signature600
Performance and Accessories 2nd gen only
5
10-05-2005 01:43 PM