I have an '03 quad cab longbed.It's a 6 speed if that matters.2wd. 84,000 on the clock. Am thinking of replacing U joints to greasables. Can anyone give me part #'s? Don't want to have to grind some off caps to make them fit. Thanks in advance!

 

IIRC they are 351A at napa. that might be way off, and im sure someone else will chime in with the exact number. try the search if you havent already. theres been numerous threads about this

brett

 

napa 351A precision U joint is the same number I have written down (from this site) for the 3 rear u joints. Its supposed to be the number for my 4wd but I havent actually changed mine. On one of the last posts I saw regarding them the guy still had to grind a small amount off the caps.

 

Had Splicers put in mine.Driveline shop did them while I waited.45 mins or so.He didn't grind on anything and pulled them by part number.

 

Had all mine changed to spicer as well. I've never ran greasable u-joints and don't see a need for them. High quality joints from spicer or other big names have always held up just fine unless your using it for a swamp buggy

 

The NAPA ones were too wide. I didn't want to grind anything so I got the oems from the dealer.

 

OEM's are AAM's! I would pull caps and add some lube to them.

 

how much were the OEM joints if you don't mind. It only took me about 3 min to grind the NAPA joints to fit on a bench grinder. It's easy just needs a little removed from the flat end.