Transfer Case Linkage to 4x4 shift missing
11-13-2013 | 10:19 AM
#1
Thread Starter
Registered User
Joined: Jun 2006
Posts: 37
Likes: 0
From: Tomball, TX
Transfer Case Linkage to 4x4 shift missing
Went to put the truck in 4x4 last weekend and the shifter on the floor was flopping around loose. Crawled under and found the linkage from the shifter to the transfer case was missing. Looks like the rubber grommets and all just fell out somewhere.
Anyone know where i may be able to find a replacement without going to a dealership? Can just imagine what it will cost there.....
Anyone know where i may be able to find a replacement without going to a dealership? Can just imagine what it will cost there.....
11-13-2013 | 11:56 AM
#2
Registered User
Joined: Oct 2011
Posts: 197
Likes: 4
From: San Francisco
This is a fairly common issue. It's an easy piece to fabricate and several people on this forum have done 'upgrades' to this part.
Went to put the truck in 4x4 last weekend and the shifter on the floor was flopping around loose. Crawled under and found the linkage from the shifter to the transfer case was missing. Looks like the rubber grommets and all just fell out somewhere.
Anyone know where i may be able to find a replacement without going to a dealership? Can just imagine what it will cost there.....
Anyone know where i may be able to find a replacement without going to a dealership? Can just imagine what it will cost there.....
11-13-2013 | 11:58 AM
#3
Registered User
Joined: Oct 2011
Posts: 197
Likes: 4
From: San Francisco
Thread
Thread Starter
Forum
Replies
Last Post
RiverRat2
3rd Gen Engine and Drivetrain -> 2003-2007
4
07-23-2014 01:01 AM
AggieJustin
3rd Gen Engine and Drivetrain -> 2003-2007
6
11-21-2011 11:25 PM
justdirt
3rd Gen Engine and Drivetrain -> 2003-2007
4
10-06-2004 02:32 PM