3rd Gen Engine and Drivetrain -> 2003-2007 5.9 liter Engine and drivetrain discussion only. PLEASE, NO HIGH PERFORMANCE DISCUSSION!

Today Is Smarty Ship Day!!!!!!!!

Thread Tools
 
Search this Thread
 
Old 10-25-2006 | 10:10 PM
  #16  
RC51's Avatar
Registered User
 
Joined: Mar 2005
Posts: 89
Likes: 0
From: VA
Bob,

Can the Smarty enable the high idle (cruise control adjusted/PTO option, not just the automatic cold weather), day time running lights, or other features built into the ECM?

if so, I'll definitely be ordering one for the 05!
Old 10-26-2006 | 07:26 AM
  #17  
MikeyB's Avatar
Registered User
 
Joined: Oct 2002
Posts: 7,543
Likes: 4
From: Tomball, Texas
Originally Posted by XLR8R
Robert said I could borrow his - I'm very tempted to test it on my quarter-mile on a few different levels - including Level 9, baby!

Then compare the #'s to Quad Race
And you will give it back to Robert, right?.......

Just don't smoke the clutch......

MikeyB
Old 10-26-2006 | 11:23 AM
  #18  
XLR8R's Avatar
Registered User
 
Joined: Nov 2005
Posts: 7,785
Likes: 3
From: Pattonville, Texas
He can have it back when he prys it from my cold, dead fingers!

I wonder if the clutch can hold up to just a few passes on the upper levels?
Old 10-26-2006 | 12:21 PM
  #19  
redstreak's Avatar
Banned
 
Joined: Oct 2004
Posts: 184
Likes: 0
From: NC
Monday morning is going to be clutch and tranny time!!! You guys keep me in mind.
Old 10-26-2006 | 12:45 PM
  #20  
RAMROD2006's Avatar
Thread Starter
Banned
 
Joined: Jul 2006
Posts: 195
Likes: 0
hehe

Originally Posted by redstreak
Monday morning is going to be clutch and tranny time!!! You guys keep me in mind.
I only have 3500 miles on mine, so I am hoping it will be ok for a week or two of level 9
Old 10-27-2006 | 02:22 AM
  #21  
TexasCTD's Avatar
Registered User
 
Joined: Nov 2004
Posts: 5,680
Likes: 2
From: McKinney, TX
Originally Posted by XLR8R
He can have it back when he prys it from my cold, dead fingers!



Stock sux. I just don't know if I can let it go, even for a little while...

Just kidding...whenever you want to get together we can go try her out on the g56 aluminum trash can tranny truck...

I will make you sign a waiver though, that whatever carnage you cause to that trans/clutch is totally your responsibilty...

Last edited by TexasCTD; 10-27-2006 at 02:26 AM. Reason: spelling error
Old 10-27-2006 | 07:02 AM
  #22  
MikeyB's Avatar
Registered User
 
Joined: Oct 2002
Posts: 7,543
Likes: 4
From: Tomball, Texas
Originally Posted by TexasCTD

Just kidding...whenever you want to get together we can go try her out on the g56 aluminum trash can tranny truck...
Ohhhh, that hurt!

Guess I'll be ordering mine next week......

MikeyB
Old 10-27-2006 | 07:57 AM
  #23  
MikeyB's Avatar
Registered User
 
Joined: Oct 2002
Posts: 7,543
Likes: 4
From: Tomball, Texas
Originally Posted by XLR8R
He can have it back when he prys it from my cold, dead fingers!

I wonder if the clutch can hold up to just a few passes on the upper levels?
Me too.
And I'll be stacking with the EZ! May have to pay a visit with ValAir.

MikeyB
Old 10-28-2006 | 12:25 AM
  #24  
XLR8R's Avatar
Registered User
 
Joined: Nov 2005
Posts: 7,785
Likes: 3
From: Pattonville, Texas
Originally Posted by TexasCTD
Stock sux. I just don't know if I can let it go, even for a little while...
I don't blame ya - I hear it's like Crack!
Old 10-28-2006 | 12:27 AM
  #25  
XLR8R's Avatar
Registered User
 
Joined: Nov 2005
Posts: 7,785
Likes: 3
From: Pattonville, Texas
Originally Posted by TexasCTD
Just kidding...whenever you want to get together we can go try her out on the g56 aluminum trash can tranny truck...
laugh]
I'll bet the beer-can tranny lives longer than the dual-mess clutch!
Old 10-28-2006 | 12:29 AM
  #26  
XLR8R's Avatar
Registered User
 
Joined: Nov 2005
Posts: 7,785
Likes: 3
From: Pattonville, Texas
Originally Posted by TexasCTD
I will make you sign a waiver though, that whatever carnage you cause to that trans/clutch is totally your responsibilty...
Does that mean you'll cover all the U-joints, all three driveshafts, both ring & pinions, and the wheel studs? (I like to power-shift, ya know! )
Old 10-28-2006 | 12:31 AM
  #27  
XLR8R's Avatar
Registered User
 
Joined: Nov 2005
Posts: 7,785
Likes: 3
From: Pattonville, Texas
Originally Posted by MikeyB
Ohhhh, that hurt!

Guess I'll be ordering mine next week......

MikeyB
Yeah - nothing hurts worse than the truth....
Old 10-28-2006 | 12:33 AM
  #28  
XLR8R's Avatar
Registered User
 
Joined: Nov 2005
Posts: 7,785
Likes: 3
From: Pattonville, Texas
Originally Posted by MikeyB
Me too.
And I'll be stacking with the EZ! May have to pay a visit with ValAir.

MikeyB
You first - and take pics of the carnage!

- I'm making my ladder bars, cowl-induction BHAF hat and installing a rail pressure gauge first.... my clutch won't know what hit it.
Old 10-28-2006 | 12:34 AM
  #29  
XLR8R's Avatar
Registered User
 
Joined: Nov 2005
Posts: 7,785
Likes: 3
From: Pattonville, Texas
Originally Posted by TexasCTD
Stock sux. I just don't know if I can let it go, even for a little while...

Just kidding...whenever you want to get together we can go try her out on the g56 aluminum trash can tranny truck...

I will make you sign a waiver though, that whatever carnage you cause to that trans/clutch is totally your responsibilty...
Sorry - I'm still LMMFAO!

Great post
Old 10-28-2006 | 03:49 AM
  #30  
TexasCTD's Avatar
Registered User
 
Joined: Nov 2004
Posts: 5,680
Likes: 2
From: McKinney, TX
Originally Posted by XLR8R
Sorry - I'm still LMMFAO!

Great post


I am feel humbled that I can entertain you so well...


Quick Reply: Today Is Smarty Ship Day!!!!!!!!



All times are GMT -5. The time now is 09:28 AM.