Reading the codes in odometer
07-09-2009, 08:57 PM
#1
Registered User
Thread Starter
Join Date: Jan 2007
Location: Dallas, Texas
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Reading the codes in odometer
My 2001 Ram would allow me to turn the key of and on quickly a couple of times and it would go into self-test and display all stored codes in the odometer.
My 2007 CTD won't seem to do that. Is that feature still available and just hidden or did they do away with it so they could charge for the codes?
Had all six injectors replaced and almost made it around the block before the MIL came on. Would like to know the code(s) before going back to the dealership. Interesting, two were bad but all six were badly carboned according to the tech report. 41000 miles and 2 1/2 years...
Any ideas?
My 2007 CTD won't seem to do that. Is that feature still available and just hidden or did they do away with it so they could charge for the codes?
Had all six injectors replaced and almost made it around the block before the MIL came on. Would like to know the code(s) before going back to the dealership. Interesting, two were bad but all six were badly carboned according to the tech report. 41000 miles and 2 1/2 years...
Any ideas?
Thread
Thread Starter
Forum
Replies
Last Post
mullishacrew
1st Gen. Ram - All Topics
4
03-18-2012 12:41 PM
exwrestler
3rd Gen Engine and Drivetrain -> 2003-2007
5
02-05-2010 09:34 AM
sallyman1
3rd Gen High Performance and Accessories (5.9L Only)
4
08-26-2008 06:20 PM