P0340 error code, would not start, cycled grid 3x, 50+ degrees F here
#1
Registered User
Thread Starter
Join Date: Mar 2004
Location: Mission B.C.
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
P0340 error code, would not start, cycled grid 3x, 50+ degrees F here
Hard a hard start this morning, cycled grid 3x... Code P0340 "camshaft position sensor circuit"...Anyone had this? Causes? Check engine light is out now but code remains. 39,000km on truck
#2
Registered User
Join Date: May 2004
Location: B.C. Canada
Posts: 616
Likes: 0
Received 0 Likes
on
0 Posts
The ECM uses the camshaft sensor to start and shifts to reading the crankshaft when running If I recall correctly. Thats my guess with your problem start. With all the heavy rain we had lately maybe some water got in the camshaft connection. It's a bugger to get to but unhook it and apply a little dielectric silicone grease and do the crankshaft sensor while you at it. Merry Christmas
Thread
Thread Starter
Forum
Replies
Last Post
Totallyrad
3rd Gen Engine and Drivetrain -> 2003-2007
17
09-28-2013 04:23 PM
1985cucv
3rd Gen Engine and Drivetrain -> 2003-2007
8
04-11-2010 10:42 AM
CarBizIndio
2nd Gen. Dodge Ram - No Drivetrain
11
05-29-2007 12:33 PM
abc4yew
3rd Gen High Performance and Accessories (5.9L Only)
15
08-18-2006 11:10 PM