Mark Hodowanec

Geno's is about $20 bucks more. Is it made any better?

Also, I assume I will need two clamps that do appear to be included with either pipe. Is this correct?

ehill

Never order form RPM Outlet, I would pay 40% more anywhere else before I order from them again.....I sure there will be more people to chim in on this one...

carharttfarmer

got mine from genos it comes with one hanger

jrussell

Got mine from RPM and had no problems. Shipping was very fast.

At the time, Geno's was about double the price and only included a couple hangers that you can buy anywhere for a few bucks.

cowboy133

Local muffler shop did my muff delete for 60 bucks welded in. sounds great too.

AlCorr

I ordered parts from RPM Outlet, It took me 7 months to get the correct parts.

matt ellerbee

ordered from genos alittle while ago, like 2 months actually. its down to $70 now. shipping was fast to, well i do live in Ga...

dodgezilla04

you can buy one from the DTR store.

67guzzler

Genos. 2 days ground from GA to FL. No problems. Left CAT on -- still very loud. Sounds cool w/6 speed.

Flatlander

The pipe I got from Geno's didn't come with clamps, just a hanger. I reused the stock clamps.

67guzzler

They were supposed to throw in one clamp that had a hanger welded to it. That goes to the back end and hangs from one of the two rubber hangers in the back..... The front end I just re-used the clamp that was there and didn't use a hanger....

Do you like the sound?

gerry

I bought mine from Piers.. went to a local truck muffler shop and bought 2 stepped clamps.. I did have to make a hanger for it though.. Without the hanger the exhaust would droop and the cat would rattle on the cross member.. a clamp with a hanger sounds like a great idea if you don't have access to a welder..

Pipe fit great and was here in 3 days...

Gerry

RamNu2

I bought mine from Geno's. As some have said it did come with a hanger/ clamp. I just reused the factory clamps. Caution if you do just use them get them really tight, then tighten them some more. I lost mine in town when i was driving that same night. So I went for the for sure clamp via mig welder and clamps now it shouldn't come off without a grinder. Oh and it sounds great and aligned perfectly.

gerry

I has such a hard time getting that stupid muffler off because of those factory clamps I will NEVER use clamps like that again...

I put on band clamps this time..!!!

Mark Hodowanec

I didn't realize that thanks - I'd rather support this site anyway! The Prices are good too - $52 for aluminized steel & $61 for stainless. Is the $9 more for stainless worth it? What is the rest of teh stock exhaust made of?