Ok, i am getting ready to put a raptor 100 and an inline fuel filter. I want to put a fuel pressure gage in while iam at it. I found the gages on this site for $250 or so $$$ now I looked on ebay and found a few different makers from $20.00 to $50.00. They were 0-30 psi w/ the same fittings. I was looking at the silver faced one from jegs part # 41021. is there a difference ? and if so what are they?

 

Electronic vs Mechanical...
Fuel inside the Cab or not...

 

nothing at all. just looks. the cp3 does not pulse like the vp44. we run a fleet of dodges and 4 of them are 06's get the taped banjo bolt and the auto meter AM-3279 snubber from genosgarage.com, a oil pressure gauge installation kit from autozone i like the copper one but they also have the plastic. i use surplus gauges but ww granger has new for about $15 and if you use the $15 glycerin filled one you do not need the $26 snubber.

 

thanks for the replys, I can always up grade to an electric one later.

 

going electrical is not a upgrade. the $8 kit $7 bolt and $15 glycerin filled gauge gets you the best and all of the fittings needed are in the kit.