Carrier bearing causing lack of power
07-13-2010 | 12:38 PM
#1
Thread Starter
Registered User
Joined: Sep 2009
Posts: 41
Likes: 0
From: Sandpoint, ID
Carrier bearing causing lack of power
I figured out here a couple of months ago I would need a new one piece drive shaft to correct my low end shudder.
Well I hadn't towed the 5er since then and kind of forgot about it since it only happens with a load on it.
Yesterday hooked up and it seems like a lack of power climbing a local road 10% grade couple of miles.
Question is could this bearing be causing a lack of power? Like I said I don't notice it unless I hook up. Truck squats 4" when hooked up. Problem just started a couple of months ago at 40k miles.
Thanks
06 3500 4x4 DRW.
Well I hadn't towed the 5er since then and kind of forgot about it since it only happens with a load on it.
Yesterday hooked up and it seems like a lack of power climbing a local road 10% grade couple of miles.
Question is could this bearing be causing a lack of power? Like I said I don't notice it unless I hook up. Truck squats 4" when hooked up. Problem just started a couple of months ago at 40k miles.
Thanks
06 3500 4x4 DRW.
Thread
Thread Starter
Forum
Replies
Last Post
ajb1974
3rd Gen Engine and Drivetrain -> 2003-2007
4
03-18-2015 05:49 PM
SpeedyWS6
3rd Gen High Performance and Accessories (5.9L Only)
24
06-10-2010 05:19 PM
Joseph H. Smith
12 Valve Engine and Drivetrain
16
01-06-2007 08:13 PM