3rd Gen Engine and Drivetrain -> 2003-2007 5.9 liter Engine and drivetrain discussion only. PLEASE, NO HIGH PERFORMANCE DISCUSSION!

Any problems using Amsoil ATF

Thread Tools
 
Search this Thread
 
Old 12-29-2004 | 07:31 PM
  #1  
cjones42's Avatar
Thread Starter
Registered User
 
Joined: Jun 2004
Posts: 193
Likes: 0
From: CT
Question Any problems using Amsoil ATF

Has anyone had any problems using Amsoil ATF in the 48RE auto transmission ? I'm coming up on 60,000 and I'm thinking of switching to Amsoil ATF.
Old 12-30-2004 | 08:43 AM
  #2  
BarryG's Avatar
Registered User
 
Joined: Aug 2002
Posts: 1,227
Likes: 50
From: Castle Rock, CO
I have been using amsoil atf in my 47re for 130k with no problems at all.
Old 12-30-2004 | 05:34 PM
  #3  
SuperGewl's Avatar
Registered User
 
Joined: Feb 2003
Posts: 1,915
Likes: 0
From: Beaverton, Oregon
The only problem I see is you waited too long. I switched mine at 3k miles. I had the dealer do the complete flush of the tranny. I wanted only the good stuff in there and yes it does make a big difference. The tranny temp runs much cooler and when I had the dealer do the 30 k miles tranny service there was no wear or band adjustments needed.
Old 12-30-2004 | 07:17 PM
  #4  
cjones42's Avatar
Thread Starter
Registered User
 
Joined: Jun 2004
Posts: 193
Likes: 0
From: CT
Thanks for the input. But I would like to hear from guys with the 48RE. I was under the impression that there are considerably differences between the 47 and 48. I can't find anything on anyone else make atf+4. My major concern is my warranty. From what I've read DC won't cover any repairs if you use other fluids.
Old 12-31-2004 | 12:09 AM
  #5  
DF5152's Avatar
Registered User
 
Joined: Dec 2002
Posts: 741
Likes: 0
From: Long Island, NY
it will void your warrantee
Old 12-31-2004 | 08:05 AM
  #6  
deezulsmoke's Avatar
Registered User
 
Joined: Dec 2003
Posts: 360
Likes: 0
From: southern indiana
I would not use amsoil atf in the 48re. My 03' had the 48re and I was told that although amsoil says it can be used in place of the atf+4 fluid, it still lacks some of the additives that is in the atf+4 trans fluid, and chrysler will void your warranty. As of now, the only place I know you can get atf+4 is from a chrysler dealership.
Old 12-31-2004 | 08:40 AM
  #7  
Hannibal's Avatar
Registered User
 
Joined: Jul 2004
Posts: 566
Likes: 0
From: west central Florida
At $16.50 a gallon for ATF+4, why wouldn't you use the correct stuff and maintain your warranty?
Old 01-01-2005 | 03:51 PM
  #8  
MonkeyLips's Avatar
Registered User
 
Joined: Oct 2003
Posts: 379
Likes: 0
From: Star, Idaho
Originally posted by deezulsmoke
I would not use amsoil atf in the 48re. My 03' had the 48re and I was told that although amsoil says it can be used in place of the atf+4 fluid, it still lacks some of the additives that is in the atf+4 trans fluid, and chrysler will void your warranty. As of now, the only place I know you can get atf+4 is from a chrysler dealership.
Where did you get this information? As far as I know, Amsoil ATF meets or exceeds the ATF+4 rating requirments as established by DCX, so it will not void the warranty.
Old 01-01-2005 | 04:33 PM
  #9  
gsdog1's Avatar
Registered User
 
Joined: Sep 2003
Posts: 746
Likes: 0
From: USA
As I understand it, Amsoil ATF meets +4 requirements according to Amsoil. Amsoil ATF does not meet +4 requirements according to DC.

Matt
Old 01-06-2005 | 11:16 AM
  #11  
MonkeyLips's Avatar
Registered User
 
Joined: Oct 2003
Posts: 379
Likes: 0
From: Star, Idaho
The use of another make of ATF+4 transmission fluid is acceptable
providing if meets the specifications of ATF+4 transmission fluid.

The above is directly from DCX. I e-mailed them in regards to using Amsoil ATF+4.
Old 01-06-2005 | 12:50 PM
  #12  
kry226's Avatar
Registered User
 
Joined: Sep 2003
Posts: 470
Likes: 3
From: Germany
But again, you have to get DC to accept that Amsoil specifically meets the ATF+4 spec.
Get them to say that "Amsoil Universal ATF is an acceptable fluid," in writing and I am sure you'll raise a few more eyebrows. Good luck.
Old 01-06-2005 | 01:55 PM
  #13  
MonkeyLips's Avatar
Registered User
 
Joined: Oct 2003
Posts: 379
Likes: 0
From: Star, Idaho
Below is a reply from DCX. According to their response, and that Amsoil says it meets or exceeds Chrysler ATF+4, I'd have to say it sure looks like Amsoil Universal ATF is good to go.

In case anyone wonders why their reply says Dear William & I signed "Sam," I go by my middle name (Sam).

__________________________________________________ ________
Thanks again for the quick reply. I thought Amsoil made a specific
ATF+4 transmission fluid, but I see it is a "universal ATF" that covers many specifications.

Could you take a look at it here http://www.amsoil.com/products/atf.html and let me know if this product would have any impact in regards to the warranty of my 48RE? I appreciate you're help!

Thanks, Sam

__________________________________________________ _________

Dear William,

We recommend contacting the manufacturer of the transmission fluid you
are seeking to use to determine whether it meets specifications for
ATF+4.

Thank you again for your email.

__________________________________________________ __________
Old 01-06-2005 | 02:17 PM
  #14  
rossn2's Avatar
Registered User
 
Joined: Dec 2003
Posts: 539
Likes: 0
From: Ft Hood Texas
You misread DC's response. The problem is that the AMSOIL ATF is NOT "API CERTIFIED" and that's how/why DC will void the warranty. If your trans does fail, make sure you get a sample of the oil to send to Amsoil, so Amsoil can resolve the issue.
Old 01-06-2005 | 08:30 PM
  #15  
MonkeyLips's Avatar
Registered User
 
Joined: Oct 2003
Posts: 379
Likes: 0
From: Star, Idaho
Are any of the automatic transmission fluids API certified? Not that I have seen. I have a qt of Quaker State and a qt Pennzoil Dextron III/Mercon ATF in my garage. Neither have the API starburst symbol. So I guess that means everyone better use the manufacturers' fluid, no matter what the make, but then again, they are not API certified either...

I don't see how DCX could deny warranty coverage simply on the basis using Amsoil ATF. They said it, if it meets ATF +4 specs, it's fine. I have used it in Ford 1/2 & 3/4s (can't remember the trans numbers), 4L60E, 4L80E, 47RE, & AW4 with nothing but surpurb results.

Is there anyone out there that has had DCX deny warranty coverage based on using Amsoil ATF?


Quick Reply: Any problems using Amsoil ATF



All times are GMT -5. The time now is 03:31 PM.