06 won't start. Dealer can't find what's wrong with it. No codes.
10-25-2010 | 12:39 PM
#17
Registered User
Joined: Jun 2008
Posts: 102
Likes: 0
From: Northport, Washington
I would check that relief valve on the rail... i bet that is your problem, the pressure test the dealer did was on the rail? or prior to the CP3? i think the rail needs to see 30k psi before she'll fire...it should at least try to start?? TOSS THAT CAN OF STARTING FLUID!
Thread
Thread Starter
Forum
Replies
Last Post
robert78.5
3rd Gen Engine and Drivetrain -> 2003-2007
7
01-16-2014 10:00 PM
subspd
General Diesel Discussion
15
05-20-2007 10:15 PM
O5DodgeRam5.9
3rd Generation Ram - Non Drivetrain - All Years
11
02-22-2007 04:11 PM
bigwheels94
3rd Gen High Performance and Accessories (5.9L Only)
3
06-23-2006 12:49 AM
339K&Counting
3rd Generation Ram - Non Drivetrain - All Years
16
09-26-2005 10:28 AM