BAGGERMAN

I just did the power tow mirror swap on my 02.I got a wiring diagram for an 01 off one of the forums the right side works fine ,the left side only has up and down no matter which way i change wires,seems to me if the motor works one way its probably not the motor.I've been working on this for half a day......need help

JLand

Left Side Mirror:

Mirror ‘06.............Connector - Pin............Door ’01.5
Blue.....................White/Black – 1............Yellow
Gray.....................Yellow – 2....................Blue/White
Green...................Light Blue(2) – 3..........Yellow/Red
Black....................Black – 4......................Black/Green
Black....................Black – 5......................Blue/Yellow


Right Side Mirror:

Mirror ’06.............Connector – Pin..............Door ’01.5
Blue.....................White – 1........................Yellow/Black
Gray.....................Yellow – 2.......................Blue
Green...................Light Blue(2) – 3.............White
Black....................Black – 4.........................Black/Green
Black....................Black – 5.........................Blue/Yellow



This is probably the same diagram you have already, but thought I'd put it here in case. It's from an 01.5. Mine is a 2002 and this worked for me. I thought I tried every combo there was and nothing worked until this.

BAGGERMAN

Thanks JLAND i'll compare my diagram to yours to see if i'am doing things right,

TOM

Marine

So by looking at this, 1 mirror wire will have 2 truck wires to it, correct?

Marine

I figured it out.