Where to get headlight relay harness at?
#1
Where to get headlight relay harness at?
I'd like to buy one, but the summit kit that I see listed in the archives has been discontinued.
Summit lists a substitute replacement, but I am unsure if it would work. They list a 9004 bulb harness and a 9007 bulb harness.
I don't have sport headlights, just factory style.
Summit lists a substitute replacement, but I am unsure if it would work. They list a 9004 bulb harness and a 9007 bulb harness.
I don't have sport headlights, just factory style.
#3
#4
I think you have the number wrong.....
It is SUM-890300
http://store.summitracing.com/partde...5&autoview=sku
It is SUM-890300
http://store.summitracing.com/partde...5&autoview=sku
#5
The 95 uses a 9004 bulb. I have the harness installed with a 9004+50 bulb in each side. Also polished out the plastic lens material on both sides to get rid of yellowing and scratches. Helps a lot and takes load off the stock switch.
#6
I have new one piece clear headlights. It helps a lot.
Do you happen to have the part number for the harness you bought?
#7
Registered User
Joined: Jan 2007
Posts: 1,820
Likes: 1
From: My head lays down in Murrieta, but the day light hours are spent in San Diego, Ca.
Try www.lmctruck.com I know they have them.
Trending Topics
#8
Registered User
Joined: Jan 2007
Posts: 1,820
Likes: 1
From: My head lays down in Murrieta, but the day light hours are spent in San Diego, Ca.
http://www.lmctruck.com/icatalog/de/t.asp?page=20
Here's the actual link for what you are looking for.
Here's the actual link for what you are looking for.
#9
Yep, that one from LMC is the same one I have installed. Easy install and takes all the load off the lousy switch that Dodge used. Stops it from burning up. Then I used 2000 grit paper and medium rubbing compound to take the yellowed layer off the light covers. Polished out with compound and a wool bonnet. Makes a lot of difference!
#10
http://www.lmctruck.com/icatalog/de/t.asp?page=20
Here's the actual link for what you are looking for.
Here's the actual link for what you are looking for.
#12
Yep, that one from LMC is the same one I have installed. Easy install and takes all the load off the lousy switch that Dodge used. Stops it from burning up. Then I used 2000 grit paper and medium rubbing compound to take the yellowed layer off the light covers. Polished out with compound and a wool bonnet. Makes a lot of difference!
what a wierd company!! they sent it in a HUGE box about 2feet by, 6" by 1ft!!
and i could barley read the direction on the back of the box, misspelled words, very wrong grammar, not what i would expect from a business..
did you have anything come up during installation that was not listed?
thanks!
#13
i just got my kit that you guys recommended from LMC..
what a wierd company!! they sent it in a HUGE box about 2feet by, 6" by 1ft!!
and i could barley read the direction on the back of the box, misspelled words, very wrong grammar, not what i would expect from a business..
did you have anything come up during installation that was not listed?
thanks!
what a wierd company!! they sent it in a HUGE box about 2feet by, 6" by 1ft!!
and i could barley read the direction on the back of the box, misspelled words, very wrong grammar, not what i would expect from a business..
did you have anything come up during installation that was not listed?
thanks!
Only issue I had harness was too short for what I liked, I added 10" of wires.
#14
i just got my kit that you guys recommended from LMC..
what a weird company!! they sent it in a HUGE box about 2feet by, 6" by 1ft!!
and i could barley read the direction on the back of the box, misspelled words, very wrong grammar, not what i would expect from a business..
did you have anything come up during installation that was not listed?
thanks!
what a weird company!! they sent it in a HUGE box about 2feet by, 6" by 1ft!!
and i could barley read the direction on the back of the box, misspelled words, very wrong grammar, not what i would expect from a business..
did you have anything come up during installation that was not listed?
thanks!
Only issue I had harness was too short for what I liked, I added 10" of wires.
#15
I think LMC is a Re-seller, don't stock anything, Just My Guess.
I tried to order over internet, did't work..
Called, finially got someone who seemed smart, ordered part,
Than they told me 7-9 days process time plus shipping time ...' Forgetaboutit'
I'm sure it's me, but I think I'll order from Summit...
Only problem, I'll wind up buying other stuff to fill the box....
??? Maybe the summit Harness is longer,
but probably same part with a higher price tag... oh well, that's life...
I tried to order over internet, did't work..
Called, finially got someone who seemed smart, ordered part,
Than they told me 7-9 days process time plus shipping time ...' Forgetaboutit'
I'm sure it's me, but I think I'll order from Summit...
Only problem, I'll wind up buying other stuff to fill the box....
??? Maybe the summit Harness is longer,
but probably same part with a higher price tag... oh well, that's life...