12valve

Does anyone have pictures of a 2wd truck with aftermarket wheels on there?

im thinking 18" or do 20" fit under there?
What options are as far as lifting or just leveling a 2wd?

Tate

Gun_racer1 had some pics of his reg cab/short box lowered on 20's. Looked pretty pimp.

12valve

ah i remember that one! i guess there are not too many on here...

12valve

Here is mine

Sea:\>Drive

I'm surprised the admins don't edit out the word lowering on this board. Most don't like it. While I don't want mine in the weeds I'd like to level it out by lowering the back end. I've found shackle kits for older trucks but not an '01, althought don't know the difference. Sorry I've got stock wheels on mine.

Isn't it hard to find E rated 20s?

juicedbusa02

Heres my shorty Wheels are 22" American Racing forged 9100 series .. i follow what seadrive says on the lowering word most don't like it but... its my sorta oddball hotrod i guess ?? lol

Chris

12valve

You might not see it, but i did lift mine 2" in the front and 5/8" in the back
they are 20" 275/55/R20 mastercraft

Tate

What drop kit did you use? I'm still tossing around the idea of lowering, bagging, or try to sled pull with the dually. Not much for sled pulls up this way though.

juicedbusa02

I cut the spring in the front which in most cases i would think would be a BUT .. it rides just fine and i would not hesitate to do it again..

in the rear i bought the Belltech shackle/hanger kit which was about 4" of drop which wasn't really enough to be "level". After that I removed one leaf from the leaf pack and will be adding airbags for help to keep the towing capacity .... hope that helps

Chris