What Do Yall's stock temp gauges read?
#1
Registered User
Thread Starter
Join Date: Dec 2003
Location: Fredericksburg, TX
Posts: 850
Likes: 0
Received 0 Likes
on
0 Posts
What Do Yall's stock temp gauges read?
Mine reads a needle above 190, no matter how I drive. This weekend I drove the school's 99 2wd 2500. It was usually around 165-170. I even couldn't get it above 180, and that was driving over 80mph in 90* weather?
Can anyone explain why this is much lower than mine?
Can anyone explain why this is much lower than mine?
#2
Registered User
Join Date: Mar 2003
Location: Ramona, CA
Posts: 341
Likes: 0
Received 0 Likes
on
0 Posts
Apparently the t-stats were changed at some point.... I asked a similar question recently, see this thread;
https://www.dieseltruckresource.com/...threadid=41408
Russ
https://www.dieseltruckresource.com/...threadid=41408
Russ
#5
DTR's Cow Boss
Hey y'all.
Ok Big Blue try looking on http://www.genosgarage.com/ i know they have the lower thermo stats, on a side note my 96 runs about 190 and little more with pulling
Ok Big Blue try looking on http://www.genosgarage.com/ i know they have the lower thermo stats, on a side note my 96 runs about 190 and little more with pulling
#6
Registered User
Join Date: Feb 2003
Location: Laredo, Tx, 7 hours south of Dallas
Posts: 1,123
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by BigBlue
Anyone have a part number for a 180* t-stat?
Anyone have a part number for a 180* t-stat?
Cummins Part # for 180* t-stat..
3967195
If you walk into the Cummins dealer, and ask them for a 180* for Dodge,, they'll say they don't make one,, so leave your comments off the Table untill you pay.
Merrick
Thread
Thread Starter
Forum
Replies
Last Post
Kman9090
3rd Gen High Performance and Accessories (5.9L Only)
29
12-06-2007 06:43 PM
coontz0473
3rd Gen High Performance and Accessories (5.9L Only)
17
09-22-2006 03:52 PM