too fast to fassed
#1
too fast to fassed
My DEPENDABLE mechanical guage said I was running 0 psi so I parked it and thought I'd bite the bullet and get a FASS pump.
It took 3.5 weeks to come in (my son's Jeep got a workout while I waited)but I just installed it Great kit! oversized lines and everything came with. I got it through Vulcan Performance, a sponsor here I think.
now the bad part, hook up the new wiring harness, bump the key and it fires right up, two more bumps and it sounds like it's pumping but....guage still says 0
Turns out the guage was bad. best as I can figure the stock LP was putting out about 12 psi.
OH WELL, now I can do some other mods, I have the fuel I might as well
I put pictures of the kit in my gallery.
It took 3.5 weeks to come in (my son's Jeep got a workout while I waited)but I just installed it Great kit! oversized lines and everything came with. I got it through Vulcan Performance, a sponsor here I think.
now the bad part, hook up the new wiring harness, bump the key and it fires right up, two more bumps and it sounds like it's pumping but....guage still says 0
Turns out the guage was bad. best as I can figure the stock LP was putting out about 12 psi.
OH WELL, now I can do some other mods, I have the fuel I might as well
I put pictures of the kit in my gallery.
Thread
Thread Starter
Forum
Replies
Last Post
EdmontonCanada
3rd Gen High Performance and Accessories (5.9L Only)
37
12-09-2009 04:18 AM