Tach, cruise control and fog lights stopped working
01-28-2013 | 10:18 PM
#1
Thread Starter
Registered User
Joined: Mar 2003
Posts: 40
Likes: 0
From: Colorado
Tach, cruise control and fog lights stopped working
Hey all posting this for a buddy that is in Chicago on a road trip that has a 1996 2500 4X4 Cummins 5spd. He called me telling me that he lost these three.
Said he checked the fuses but couldn't see one marked cruise control ect.
Any help would be appreciated.
Said he checked the fuses but couldn't see one marked cruise control ect.
Any help would be appreciated.
01-29-2013 | 09:49 PM
#2
Thread Starter
Registered User
Joined: Mar 2003
Posts: 40
Likes: 0
From: Colorado
Update:
Turns out it was some frayed wires down at the TPS which inturn told the ECM not to charge the batteries and send no signal to the tach or cruise control.
Basiclly telling the ECM the engine wasn't running...
The fog lights did work but batteries were down so much he couldn't tell
Anyway he replaced the TPS and all is good....
Turns out it was some frayed wires down at the TPS which inturn told the ECM not to charge the batteries and send no signal to the tach or cruise control.
Basiclly telling the ECM the engine wasn't running...
The fog lights did work but batteries were down so much he couldn't tell
Anyway he replaced the TPS and all is good....
Thread
Thread Starter
Forum
Replies
Last Post
BossHogg
3rd Gen Engine and Drivetrain -> 2003-2007
15
12-21-2007 09:54 AM
fjbiker86
3rd Generation Ram - Non Drivetrain - All Years
37
12-09-2007 08:29 AM
Pat H
2nd Gen. Dodge Ram - No Drivetrain
3
11-26-2005 06:46 PM
landscaper
1st Gen. Ram - All Topics
6
02-16-2005 05:21 PM