Speedi-sleeve for front seal?
#1
Registered User
Thread Starter
Join Date: Dec 2003
Location: Central PA
Posts: 839
Likes: 0
Received 0 Likes
on
0 Posts
Speedi-sleeve for front seal?
I put this here because I don't think it matters if it's 12v or 24v.
The front seal on the crank was replaced after 1 year of having a "new" seal put on by the PO - turns out the shop just pounded the new seal OVER the old seal..
So, everything was done right this time, but it's still leaking after just a little while (a few thousand miles), and trust me.. it's a big mess under there.
Is there some kind of speedi-sleeve / oversize seal that anyone is aware of? This leak has ruined my concrete driveway already, and everyone can tell where I've been parking at work..
The front seal on the crank was replaced after 1 year of having a "new" seal put on by the PO - turns out the shop just pounded the new seal OVER the old seal..
So, everything was done right this time, but it's still leaking after just a little while (a few thousand miles), and trust me.. it's a big mess under there.
Is there some kind of speedi-sleeve / oversize seal that anyone is aware of? This leak has ruined my concrete driveway already, and everyone can tell where I've been parking at work..
Thread
Thread Starter
Forum
Replies
Last Post
6spd05Dually
3rd Gen Engine and Drivetrain -> 2003-2007
11
05-12-2011 09:44 PM
92smokin blacky
1st Gen. Ram - All Topics
12
01-04-2011 12:43 AM
jesussaves
1st Gen. Ram - All Topics
1
05-15-2010 12:18 PM
bob95065
12 Valve Engine and Drivetrain
5
04-03-2008 10:27 PM
Boondock
12 Valve Engine and Drivetrain
10
04-29-2005 06:08 PM