Pullin' Da dash
04-21-2005 | 07:33 PM
#17
Registered User
Joined: Mar 2004
Posts: 103
Likes: 0
From: Monroe,Michigan
Originally posted by Haulin_in_Dixie
I will make one comment here, the service manual says to unbolt the top of the dash, of course after the steering is out and wires disconnected. It says to form a wire with a hook at both ends to hold the das in the down position. Not a chance, it is far too heavy. I moved the seats forward and put pillows on them and let the dash rest on them. Worked well.
I will make one comment here, the service manual says to unbolt the top of the dash, of course after the steering is out and wires disconnected. It says to form a wire with a hook at both ends to hold the das in the down position. Not a chance, it is far too heavy. I moved the seats forward and put pillows on them and let the dash rest on them. Worked well.
04-23-2005 | 11:01 AM
#19
Registered User
Joined: Nov 2001
Posts: 4,199
Likes: 1
From: Branchville, Alabama
Even more fun when you work like I do, always alone. There are some on here that say it is an easy job 
But then I am not as professional as I once was, now I am not fast, just half fast 
But then I am not as professional as I once was, now I am not fast, just half fast
Thread
Thread Starter
Forum
Replies
Last Post
Topper
3rd Gen High Performance and Accessories (5.9L Only)
16
02-24-2010 10:41 PM
NoSparkplugs
3rd Generation Ram - Non Drivetrain - All Years
17
05-17-2009 11:36 PM