Optimum alignment measurements?
#1
Registered User
Thread Starter
Optimum alignment measurements?
Ugh, just spent the last two days under cars, not fun . Swapped out a pair of wheel hubs on a 1500 ram which were easier than my 2500 (thanks Infidel for the press trick) and installed my DSS and Thuren trackbar . I can already feel the steering slop has decreased. The questions I have are does anyone know what the magic numbers for the front end alignment are offhand? Id like to eliminate any future death wobble episodes if possible =)
Also would like to know if anyone has a link to the procedure for centering the steering wheel and any adjustments I can make on the power steering box to help with slop in the wheel.
Also would like to know if anyone has a link to the procedure for centering the steering wheel and any adjustments I can make on the power steering box to help with slop in the wheel.
#2
I haven't tried these yet. I think I copied them from one of Cowhand's posts.
Setting Left Wheel Right Wheel
Caster 3.2° 3.5°
Camber -0.10° -0.10°
Cross Caster -0.3°
Cross Camber 0.0°
Toe Standard specs
Setting Left Wheel Right Wheel
Caster 3.2° 3.5°
Camber -0.10° -0.10°
Cross Caster -0.3°
Cross Camber 0.0°
Toe Standard specs
Thread
Thread Starter
Forum
Replies
Last Post
BigJohnston
3rd Gen High Performance and Accessories (5.9L Only)
3
04-03-2008 07:47 AM
goose2w1
3rd Gen High Performance and Accessories (5.9L Only)
5
08-20-2007 08:04 AM
TxDiesel007
Performance and Accessories 2nd gen only
14
11-22-2006 08:25 PM