Now what did I do wrong?
#1
Banned
Thread Starter
Join Date: Jun 2006
Location: New Hampshire
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
Now what did I do wrong?
Well, I installed sport lights and wired them up according to the wiring diagram I pulled from this forum and daniel stern lighting. Everything works great unless I have the fog lights turned on. If I do and turn on the high beams, highs and lows come on and stay on regardless of whether the high beam switch is on or off. They only go back down to lows when I turn the fog lights off. Relays are wired directly to the battery and the low or high and ground wires at the old headlight socket. How the fog lights come into this, I'm not sure??
I must admit that it is a nice 'feature' to have the lows and highs on and all I have to do is turn the fogs on. But I don't want to fry the headlight switch. Anyone have any ideas? It does have the factory plow prep package, but I can't see how that would impact the fogs.
Thanks
I must admit that it is a nice 'feature' to have the lows and highs on and all I have to do is turn the fogs on. But I don't want to fry the headlight switch. Anyone have any ideas? It does have the factory plow prep package, but I can't see how that would impact the fogs.
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
Tengu
Performance and Accessories 2nd gen only
4
03-01-2004 11:57 PM
PistolWhipt
Suggestions, Comments and Site Questions
4
03-23-2003 08:41 AM