Now I like sitting in my truck!!
#1
Registered User
Thread Starter
Join Date: Nov 2006
Location: Claremont, NH
Posts: 844
Likes: 0
Received 0 Likes
on
0 Posts
Now I like sitting in my truck!!
I put a set of seats with the center console out of a 2004 GMC in my truck today. They are gray, just like the Dodge seats and they sure are comfortable.
#4
Registered User
Thread Starter
Join Date: Nov 2006
Location: Claremont, NH
Posts: 844
Likes: 0
Received 0 Likes
on
0 Posts
#7
Registered User
Thread Starter
Join Date: Nov 2006
Location: Claremont, NH
Posts: 844
Likes: 0
Received 0 Likes
on
0 Posts
It took some searching, but I got these for $100.00. They were filthy and required a lot of cleaning, but they cleaned up real nice. I did not want to buy a $500.00+ set of seats and find out they would not work.
Trending Topics
#8
Registered User
Thread Starter
Join Date: Nov 2006
Location: Claremont, NH
Posts: 844
Likes: 0
Received 0 Likes
on
0 Posts
The mounting bolts were not the same. I had to drill holes, but they were close and they went through the reinforcement plate for the dodge seats. I also had to fabricate two brackets for the front outer corners.
#15
Registered User
Thread Starter
Join Date: Nov 2006
Location: Claremont, NH
Posts: 844
Likes: 0
Received 0 Likes
on
0 Posts
The mounting bolts were not the same. I had to drill holes, but they were close and they went through the reinforcement plate for the dodge seats. I also had to fabricate two brackets for the front outer corners.