Not Heating up
#16
Registered User
Join Date: Dec 2005
Location: Manitoba, Canada
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Heater hose restrictor removal.
see http://dodgeram.org/tech/dsl/trouble.../isb_noise.htm.
They refer to a restrictor in the heater input hose that can be removed. Mine was already gone.
They refer to a restrictor in the heater input hose that can be removed. Mine was already gone.
#17
Registered User
Join Date: Jun 2005
Location: east central IL
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by thedblc
I have been using the recirculating heat options ...
Ok, I missed this page in the owner's manual. How do we do
the recirculate heat thing?
Thanks,
Lowell
#18
Registered User
Originally Posted by TORQUE
Check your rotary heat dial for full range of heat(may be stripped) or stuck on cold side. If engine is up to temp, heater hoses should be hot also(inlet hose is hotter) . If engine is still slightly cold(not into normal range yet), inlet heater hose should be slightly warm to the touch already. Check coolant level, check if water pump is circulating, and put on a winter front of some sort(check out my pics).
Dave
#19
Registered User
Originally Posted by lglamb
Ok, I missed this page in the owner's manual. How do we do
the recirculate heat thing?
Thanks,
Lowell
the recirculate heat thing?
Thanks,
Lowell
Thread
Thread Starter
Forum
Replies
Last Post
patdaly
2nd Gen. Dodge Ram - No Drivetrain
11
01-25-2007 11:56 AM