Needing trouble shooting steps for cruise contro
#16
Registered User
Join Date: Mar 2008
Location: Fall River Nova Scotia
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
https://www.dieseltruckresource.com/...d.php?t=274626
Try my old post just go to a junk yard and get one off a dodge that is around the same year with the same plug. The cable end just has to be removed and the clip removed and install your cable.
Try my old post just go to a junk yard and get one off a dodge that is around the same year with the same plug. The cable end just has to be removed and the clip removed and install your cable.
#17
Registered User
Thread Starter
Join Date: Mar 2005
Location: n.h.
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
UPDATE:: Wow got it, thanks for the reply's.New switch from auto zone was bad.Could not get it in my head why i was getting no power to the servo and stop lamps off, Another reason i hate wiring issues.New switch from advanced have cruise, and no brake or abs lights on.
One thing i discovered with the servo was i took it all apart, and was able to take a 9v battry, and a couple jumper wires and make that unit cycle and check it that way.
Nice lil road trip in the hills,cruise is now steady,and smooth, i do believe I had some vacuum leaking.
One thing i discovered with the servo was i took it all apart, and was able to take a 9v battry, and a couple jumper wires and make that unit cycle and check it that way.
Nice lil road trip in the hills,cruise is now steady,and smooth, i do believe I had some vacuum leaking.
#18
Registered User
New switch from auto zone was bad.
Thread
Thread Starter
Forum
Replies
Last Post
ArbrnEngr
2nd Gen. Dodge Ram - No Drivetrain
12
04-13-2014 03:12 PM
bigredbrick
1st Gen. Ram - All Topics
4
01-22-2008 11:39 PM
BearKiller
Towing and Hauling / RV
0
07-23-2007 11:21 PM