Moog vs XRF lower ball joints
#1
Registered User
Thread Starter
Join Date: Jul 2007
Location: Leander,Tx
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
Moog vs XRF lower ball joints
I've had a bad wandering sensation ever since I rebuilt the entire front end. After going thru 3 gear boxes , 2 alignments, steering shaft, rock solid ram bushing and new tires (needed them regardless do to low tread but evenly worn). I solved the problem today by replacing the perfectly fine Moog 16 month old lower ball joints with XRF lowers. The drive after it was all back together was very impressive. Can't wait until this weekend and get the alignment rechecked to see if it can get even better. The truck no longer wanders down the road. I have always liked Moog front end parts and will still use them except for the lower ball joints on this truck. Would of never believed that would cure my issue.
#3
Registered User
Join Date: Oct 2005
Location: Central MA
Posts: 589
Likes: 0
Received 0 Likes
on
0 Posts
Moog is the bottom end of the product line from the company now, TRW is above them, and another brand in tops. I'd pass on Moog in favor of TRW whenever possible.
Thread
Thread Starter
Forum
Replies
Last Post
exwrestler
3rd Gen Engine and Drivetrain -> 2003-2007
7
04-28-2014 09:55 AM
SSV1761982
HELP!
4
08-16-2009 09:38 AM
D-Roc
3rd Generation Ram - Non Drivetrain - All Years
9
03-01-2009 12:20 AM