"MIL" on cold start
#1
Registered User
Thread Starter
Join Date: Jan 2005
Location: Maine
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
"MIL" on cold start
I bought a 2001 Dodge Ram 2500 with a CTD yesterday. After fueling the MIL light came on and stayed on until I shut the truck down for about 5 mintues then restarted. The WAIT light may have been on when I started it the first time.
This morning when it was around 40 degrees I started it and the MIL light came on again. Once again after shutting down, waiting a bit and restarting the light went out. The light comes on for the light check before you start it but when it has messed up the light stays on after the check.
Any ideas as to why this happens or how to access the codes?
Thanks
This morning when it was around 40 degrees I started it and the MIL light came on again. Once again after shutting down, waiting a bit and restarting the light went out. The light comes on for the light check before you start it but when it has messed up the light stays on after the check.
Any ideas as to why this happens or how to access the codes?
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
PEAKSTRYDE
Suggestions, Comments and Site Questions
1
10-11-2007 04:20 PM
04ctd
Other
75
06-01-2005 11:55 PM
JIMCTD
3rd Gen High Performance and Accessories (5.9L Only)
4
02-05-2005 08:57 AM
katoiler
3rd Gen High Performance and Accessories (5.9L Only)
15
09-22-2004 09:57 AM