keyless entry 1997 3500
#16
i just recieved this on another board
Yes to program keyless transmitter you have to access data link connector same connector you hook scan tool to under dash just to the left of the steering column ground the dark green wire in cavity 1 in connector turn key on and door locks will cycle then press and hold a button on transmitter door locks will cycle to acknowledge transmitter must program all transmitters at same time eaven the functional transmitter must be reprogramed all at same time
Yes to program keyless transmitter you have to access data link connector same connector you hook scan tool to under dash just to the left of the steering column ground the dark green wire in cavity 1 in connector turn key on and door locks will cycle then press and hold a button on transmitter door locks will cycle to acknowledge transmitter must program all transmitters at same time eaven the functional transmitter must be reprogramed all at same time
#18
Registered User
dunerr,
Just got information from my buddy. The instructions are similar to what you found on the other board. I have a PDF file that has the instructions. If you want them, PM me your email address.
Chris
Just got information from my buddy. The instructions are similar to what you found on the other board. I have a PDF file that has the instructions. If you want them, PM me your email address.
Chris
Thread
Thread Starter
Forum
Replies
Last Post
joelayan
2nd Gen. Dodge Ram - No Drivetrain
1
02-19-2009 08:02 AM
Haulin_in_Dixie
2nd Gen. Dodge Ram - No Drivetrain
15
09-06-2005 06:08 AM