hose plastic anchors for the cab light screws
#1
Registered User
Thread Starter
Join Date: Oct 2008
Location: Alabama
Posts: 520
Likes: 0
Received 0 Likes
on
0 Posts
Those plastic anchors for cab light screws
I was just wondering if any of you guys have had to replace those little plastic anchors that you use to hold the screws in on the cab lights. I got a couple of them that are stripped out and don't hold good anymore. Anybody had to find these before? Thanks for any help.
#2
Sausage Aficionado (In training)
What about filling them with some 5 minute epoxy and after it has set (about 24 hrs), drill them out just a bit smaller than the screws?
Like a helicoil for plastic/nylon.
Like a helicoil for plastic/nylon.
Thread
Thread Starter
Forum
Replies
Last Post
jeepnut47
2nd Gen. Dodge Ram - No Drivetrain
5
11-22-2014 08:31 PM
SOhappy
General Diesel Discussion
30
03-08-2009 03:17 PM
MegaCabinPA
3rd Generation Ram - Non Drivetrain - All Years
16
09-20-2007 10:50 AM
MegaCabinPA
3rd Gen Engine and Drivetrain -> 2007 and up
6
09-18-2007 09:40 AM