Blower only runs on high.
#1
Registered User
Thread Starter
Join Date: Jul 2005
Location: South Dakota
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
Blower only runs on high.
Howdy;
I had a post on this a few weeks back, but couldnt seem to resurect it.
My A/C or Heater fan will only run on setting # 4. Several had mentioned removing the blower relay down by the fan, and possibly replacing it.
Today I dug around in the area of my blower, underneath the dash, and could not find anything resembling a relay. Anybody have any insight on this? Do I need to remove the blower in order to get at this problem relay?
I cant find my relay!!
I had a post on this a few weeks back, but couldnt seem to resurect it.
My A/C or Heater fan will only run on setting # 4. Several had mentioned removing the blower relay down by the fan, and possibly replacing it.
Today I dug around in the area of my blower, underneath the dash, and could not find anything resembling a relay. Anybody have any insight on this? Do I need to remove the blower in order to get at this problem relay?
I cant find my relay!!
#2
Registered User
Thread Starter
Join Date: Jul 2005
Location: South Dakota
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
I found it.........just left and back of the fan, up high, against the firewall. 2 screws, pulled the relay down, and discovered a broken wire clip. Resoldered, and reinstalled........fan works! Saved me about $50!!
#3
Registered User
Join Date: Jun 2005
Location: east central IL
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
should be right next to the blower fan, right up against the
firewall, held in by 2 screws, about 1"x3", have a cable plugged
into it, and maybe a small open spade connector. about center
right-left in the passenger foot well, etc.
it wasn't immediately obvious when I looked for mine, just
made a site-educated guess.
I found it online for $61 (I think maybe including shipping).
Still hoping to get lucky at a recycle yard, tho.
Lowell
firewall, held in by 2 screws, about 1"x3", have a cable plugged
into it, and maybe a small open spade connector. about center
right-left in the passenger foot well, etc.
it wasn't immediately obvious when I looked for mine, just
made a site-educated guess.
I found it online for $61 (I think maybe including shipping).
Still hoping to get lucky at a recycle yard, tho.
Lowell
Thread
Thread Starter
Forum
Replies
Last Post
Jim Lane
1st Gen. Ram - All Topics
14
04-05-2020 06:03 AM
jmlcolorado
3rd Generation Ram - Non Drivetrain - All Years
7
05-04-2013 10:02 AM