2nd Gen. Dodge Ram - No Drivetrain Discussion for all Dodge Rams from 1994 through 2002. Please, no engine or drivetrain discussion.

Best way to take off emblems and side molding

Thread Tools
 
Search this Thread
 
Old 08-31-2005 | 09:18 AM
  #1  
one54ton's Avatar
Thread Starter
Registered User
 
Joined: Aug 2005
Posts: 771
Likes: 0
From: L-town, NOR*CALi
Best way to take off emblems and side molding

What have you guys done. Ive heard a hair dryer works great. I need more input though - chris
Old 08-31-2005 | 09:28 AM
  #2  
yfz450guy's Avatar
Registered User
 
Joined: Aug 2005
Posts: 663
Likes: 3
From: vancouver, wa.
hair dryer or heat gun and a plastic spatula. i work in an auotbody shop and it takes me about 5 minutes to remove a full set of decals or emblems. i have the right tools for the job though.
Old 08-31-2005 | 10:50 AM
  #3  
dodgediesel4x4's Avatar
Registered User
 
Joined: Dec 2003
Posts: 850
Likes: 0
From: Fredericksburg, TX
I've heard of guys using fishing line to do this. I've never had any experience w/ it though. I think it might still leave some residue, but a little bit of brake parts cleaner, and that will be gone. Geez, I love brakes parts cleaner, I just wish the can wouldn't run out so fast.
Old 08-31-2005 | 11:21 AM
  #4  
neveragain's Avatar
Registered User
 
Joined: Oct 2004
Posts: 347
Likes: 1
From: Fort St John BC Canada
removing mouldings/ emblems

My one side moulding came part way off several years ago has been dangling since. Yesterday the front ram emblem came off while I washed it. (so much for ram tough)
WD-40 works well to remove glue residue etc. Spray on let it soak and rub comes off great.
Old 08-31-2005 | 11:39 AM
  #5  
HaulinBut's Avatar
Registered User
 
Joined: Aug 2004
Posts: 295
Likes: 0
After reading an earlier post, I decided to remove mine. I started with the last "0" of the 2500 on my door. I used a heat gun, followed by a plastic bondo spreader and a large selection of chemicals, including brake cleaner. I soaked and reheated even with very poor results. The end result was I had done some fairly substantial damage to the finish...scrapes and ripples in the paint. Bummed me out, and I ended up glueing the "0" back on. Be careful. If I want them removed, I will take the job to a pro.
Old 08-31-2005 | 11:14 PM
  #6  
Cyborrg's Avatar
Registered User
 
Joined: Apr 2004
Posts: 134
Likes: 0
From: sittin in the mitten
Just did mine. Heat 'em up, peel them off. Use glue gone . wash and wax...
Old 09-01-2005 | 10:56 AM
  #7  
SilverRam01's Avatar
Registered User
 
Joined: Jul 2005
Posts: 169
Likes: 0
From: South Dakota
Why are we taking emblems off ??
Old 09-01-2005 | 01:17 PM
  #8  
phox_mulder's Avatar
Administrator
 
Joined: May 2002
Posts: 6,522
Likes: 1
From: Sandy, Utah
Originally posted by SilverRam01
Why are we taking emblems off ??
I've never understood that either.

I'd only remove mine to replace them with bigger, better and stronger ones.

To each his own I guess.


phox
Old 09-01-2005 | 05:42 PM
  #9  
yarddog's Avatar
Registered User
 
Joined: Jul 2005
Posts: 378
Likes: 0
From: Denver, CO
I saw a 2nd gen 4x4 the other day with no emblems. I couldn't tell if he had a diesel, was a 1/2 ton, 3/4 ton or what. The truck looked neutered.

I wear the badges proud, if they come off on their own I'll put 3rd gen badges on.
Old 09-01-2005 | 06:38 PM
  #10  
oscaroc's Avatar
Registered User
 
Joined: Jul 2004
Posts: 282
Likes: 0
From: UT
If you make your truck loud and smokey enough you don't need no stinkin' badges
People will know what you are driving
Old 09-01-2005 | 07:17 PM
  #11  
dslchk_cowgirl's Avatar
Registered User
 
Joined: Jul 2005
Posts: 130
Likes: 0
From: San Diego, CA/Seabee Wife
My 99 didn't have any of the badges (sport edition) so it was fun seeing the look on people's face when I fired it up. My 01 has them and I like having them on there. Husband said he was going to remove them, then got "the look" and said nevermind.
Old 09-02-2005 | 08:34 AM
  #12  
BlueRam01's Avatar
Registered User
 
Joined: Jun 2005
Posts: 110
Likes: 0
From: Rhode Island
I am removinig the trim and emblems on my 96 for a new paint job but they are going back on...maybe as the newer style decals.
To contribute to the thread, I used safety wire to cut the adhesive tape then solvet (enamel reducer) and a razor blade to remove the residue.
Old 09-02-2005 | 05:57 PM
  #13  
Gotlift01's Avatar
Banned
 
Joined: Jul 2005
Posts: 1,340
Likes: 0
I personally think the badges look somewhat tacky.........I prefer them gone so you have a nice clean look. I don't really care whether they think its a gas or a diesel..............they find out real quick when they hear it about to run them over!!!
Old 09-02-2005 | 06:42 PM
  #14  
TxDiesel007's Avatar
Registered User
 
Joined: Dec 2004
Posts: 3,411
Likes: 1
From: Laredo
Originally Posted by dslchk_cowgirl
, then got "the look" and said nevermind.
Smart man he be..

i wanna remove my banks ones, BUT itll be the only thing left on the truck that actually is banks when im done with it, plus i like the way they look... even tho they do draw attention..

Tx
Old 09-03-2005 | 01:25 AM
  #15  
BigBlue's Avatar
Banned
 
Joined: Feb 2002
Posts: 0
Likes: 0
I was told by a body shop to use mineral spirits and a PLASTIC kitchen spatula. That's how I removed mine and it worked pretty good. The result was well worth it in my opinion.




All times are GMT -5. The time now is 05:28 AM.