Alignment Specs
#1
Registered User
Thread Starter
Join Date: May 2003
Location: Fort McMurray Alberta
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
Alignment Specs
I have read that someone has new steering specs for my 2001 dodge ram this is supossed to help it not pull to the right. I have just installed new tires and would like to try these specs out to see if they help. If anybody knows the different numbers could you please tell me. Thanks in Advance
#2
Registered User
#3
Registered User
Join Date: Dec 2002
Location: Brentwood, CA - Dallas, Tx
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
Re:Alignment Specs
I'd like to see how you adjust the toe-in and out on these solid axle trucks. I noticed when I pulled a load that sat the back of my truck down 2-3 inches that my truck would not pull to the right. Straight as an arrow while trailering but will pull right without load. Strange? or just a toe adjustment issue.??
-CM
-CM
#4
Registered User
Re:Alignment Specs
[quote author=cmckinney link=board=5;threadid=19753;start=#msg185957 date=1063818725]
I'd like to see how you adjust the toe-in and out on these solid axle trucks. I noticed when I pulled a load that sat the back of my truck down 2-3 inches that my truck would not pull to the right. Straight as an arrow while trailering but will pull right without load. Strange? or just a toe adjustment issue.??
-CM
[/quote]
Mine does the same thing, always has.
I'd like to see how you adjust the toe-in and out on these solid axle trucks. I noticed when I pulled a load that sat the back of my truck down 2-3 inches that my truck would not pull to the right. Straight as an arrow while trailering but will pull right without load. Strange? or just a toe adjustment issue.??
-CM
[/quote]
Mine does the same thing, always has.
Thread
Thread Starter
Forum
Replies
Last Post
camocreation
2nd Gen. Dodge Ram - No Drivetrain
3
10-07-2006 02:42 PM
IsItFast
3rd Gen Engine and Drivetrain -> 2003-2007
1
11-14-2005 12:47 AM