2wd upper ball joint.... HELP
#1
Registered User
Thread Starter
Join Date: May 2006
Location: St. George Utah
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
2wd upper ball joint.... HELP
I just purchased a 95' and I need to replace the upper ball joints to pass inspection. I ordered the parts from the local parts place (moog problem solver is what they brought) I have been poking around on here trying to find a guide for replacing them. I keep finding threads that say the uppers should screw in and out, but the parts they sent me are press in style. I just pulled the left front wheel to check and it looks like they are press in....
Are they press in, or screw in and if they are screw in how to you thread them out and back in??
Thanks
Are they press in, or screw in and if they are screw in how to you thread them out and back in??
Thanks
#5
Registered User
Join Date: May 2003
Location: Southeastern Michigan
Posts: 953
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
EdmontonCanada
3rd Gen High Performance and Accessories (5.9L Only)
37
02-04-2016 12:02 PM
wcbcruzer
2nd Gen. Dodge Ram - No Drivetrain
22
04-30-2008 06:58 PM