24 Valve Engine and Drivetrain Discuss the 24 Valve engine and drivetrain here. No non-drivetrain discussions please. NO HIGH PERFORMANCE DISCUSSION!

You guys running a stock LP and big line kit

Thread Tools
 
Search this Thread
 
Old 04-03-2008, 07:52 AM
  #16  
Registered User
 
Copenhagenjunkie's Avatar
 
Join Date: Dec 2001
Location: Saint Ignatius, MT
Posts: 1,246
Received 1 Like on 1 Post
I like the big line relocation kit, it works very well with the stock lp.
Idle 16-17
nothing below 12 any other time (crusing, pulling trailer, wot).
Old 04-03-2008, 09:23 AM
  #17  
Registered User
 
nkennedy's Avatar
 
Join Date: Sep 2007
Location: Algoa, Texas
Posts: 668
Likes: 0
Received 1 Like on 1 Post
I get 14 -15 psi Idle. 10 psi WOT.
Old 04-20-2008, 08:44 PM
  #18  
Registered User
 
coachgrowl's Avatar
 
Join Date: Nov 2006
Location: Alameda, CA
Posts: 148
Likes: 0
Received 0 Likes on 0 Posts
I have the vulcan big line with the stock lift pump. 14 at idle 10 at WOT. Yesterday idle dropped to 11 changed filter and back up to 14 she goes, without the gauge I never would have known, didn't run any different. BTW new goerend tranny installed over the weekend sweeeeeeet.
Old 04-20-2008, 11:01 PM
  #19  
Registered User
 
19Fury69's Avatar
 
Join Date: Oct 2007
Location: High River, Alberta
Posts: 511
Likes: 0
Received 0 Likes on 0 Posts
how long does it take to put in the big line kit?
Old 04-21-2008, 12:37 AM
  #20  
Registered User
 
kelownadiesel's Avatar
 
Join Date: Mar 2006
Location: kelowna
Posts: 520
Likes: 0
Received 0 Likes on 0 Posts
Have the bigline kit and a stock carter on the frame.12 idle,10 cruise.7or 8 wot.Never had a problem
Old 04-21-2008, 05:54 PM
  #21  
Registered User
 
babyjoe's Avatar
 
Join Date: Feb 2008
Location: Versailles Illinois
Posts: 330
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Fishin2Deep4U
The factory fuel module is extremely restrictive in your year truck. A Draw Straw will lower the work required to flood the pump inlet!!

Dave
Alright dummy here what is a draw straw and the fuel module...???
Thanks Babyjoe.
Old 04-21-2008, 06:27 PM
  #22  
Registered User
 
Fishin2Deep4U's Avatar
 
Join Date: Mar 2002
Location: The Great Northwest!
Posts: 1,276
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by babyjoe
Alright dummy here what is a draw straw and the fuel module...???
Thanks Babyjoe.
A Draw Straw is a brand of draw tube that goes into the fuel tank and functions as a pickup for the fuel. It is a larger diameter than the factory plumbing in the fuel module.

The fuel module is the device that the fuel is drawn from and returned to. It is located in the tank and is retained by a large threaded locking ring on top of the tank. Inside, it has various restrictions depending on year. In the later 2nd gens, there are 3 restrictions that are .24" ID. One of which is a hard 90*. The fuel must be draw through this system in order to supply the pump.

Dave
Old 04-22-2008, 05:15 PM
  #23  
Registered User
 
Clunk's Avatar
 
Join Date: Nov 2002
Location: Tenn.
Posts: 1,766
Received 1 Like on 1 Post
I get 15psi idle and 9.5-10psi WOT with mine.
I use a mechanical gauge.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
steelblitzkrieg
3rd Gen High Performance and Accessories (5.9L Only)
6
11-26-2010 12:41 PM
Mechanos
Performance and Accessories 2nd gen only
7
01-22-2009 11:25 AM
ptgarcia
3rd Gen High Performance and Accessories (5.9L Only)
12
08-18-2006 03:52 PM
the496rocket
24 Valve Engine and Drivetrain
2
07-26-2006 09:11 PM
jeeptjstud
Performance and Accessories 2nd gen only
8
01-26-2006 06:40 PM



Quick Reply: You guys running a stock LP and big line kit



All times are GMT -5. The time now is 02:19 PM.