wont start. ran it earlier today-fine. no codes fp=18 psi
#1
Registered User
Thread Starter
Join Date: May 2003
Location: Bryan, Texas
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
wont start. ran it earlier today-fine. no codes fp=18 psi
I cant get the dern thing started. if I had transportation I would try goin to town to buy some starting fluid. lol
i need help.
no codes
was running great when I pulled it in the drive 1.5 hrs ago.
battery is good shape, it will crank forever
lp sounds strong and fp reads 18 but immediately drops to 0 when the lp turns off.
unsure what to do but im gonna run the battery down if i keep cranking on it.
any help would be appreciated.
i need help.
no codes
was running great when I pulled it in the drive 1.5 hrs ago.
battery is good shape, it will crank forever
lp sounds strong and fp reads 18 but immediately drops to 0 when the lp turns off.
unsure what to do but im gonna run the battery down if i keep cranking on it.
any help would be appreciated.
#5
Registered User
Thread Starter
Join Date: May 2003
Location: Bryan, Texas
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
unsure what the problem was..
I finally got enough WD40 squirted in the breather to make it fire. lol
after it fired it ran smooth no probs.
since then i have started it about 5 times no problem.
I had just filled it up with diesel. might have had a bad batch of diesel. but i would think the problem would still be there.
I dont know i guess i will ignore it until the problem resurfaces.
still no codes other than the same old p1693 that i have had for about 4 years now.
I finally got enough WD40 squirted in the breather to make it fire. lol
after it fired it ran smooth no probs.
since then i have started it about 5 times no problem.
I had just filled it up with diesel. might have had a bad batch of diesel. but i would think the problem would still be there.
I dont know i guess i will ignore it until the problem resurfaces.
still no codes other than the same old p1693 that i have had for about 4 years now.
#6
Registered User
unsure what the problem was..
I finally got enough WD40 squirted in the breather to make it fire. lol
after it fired it ran smooth no probs.
since then i have started it about 5 times no problem.
I had just filled it up with diesel. might have had a bad batch of diesel. but i would think the problem would still be there.
I dont know i guess i will ignore it until the problem resurfaces.
still no codes other than the same old p1693 that i have had for about 4 years now.
I finally got enough WD40 squirted in the breather to make it fire. lol
after it fired it ran smooth no probs.
since then i have started it about 5 times no problem.
I had just filled it up with diesel. might have had a bad batch of diesel. but i would think the problem would still be there.
I dont know i guess i will ignore it until the problem resurfaces.
still no codes other than the same old p1693 that i have had for about 4 years now.
Thread
Thread Starter
Forum
Replies
Last Post
jdddually
24 Valve Engine and Drivetrain
9
06-16-2011 09:18 PM
motojoeis01
3rd Gen Engine and Drivetrain -> 2003-2007
18
09-05-2010 12:31 AM
JHew84
24 Valve Engine and Drivetrain
11
12-02-2009 04:24 PM