VP options
#46
Registered User
Thread Starter
Hey guys one more, on the gear housing covers, are there any differances or will the one off my 24v design case work with the 12v case? Just like to know in advance.... thanks =D
TNutcher
p.s. most of the stuff that isn't custom is being shipped already and then I need to go buy the lines and a cam and a couple parts from Dodge and I should be able to start!!! WHOO HOO!! I'm excited bout this! gotta wait till school gets out to have some time to work on it.... (Junior at RC High School, CA) so not too much longer.
TNutcher
p.s. most of the stuff that isn't custom is being shipped already and then I need to go buy the lines and a cam and a couple parts from Dodge and I should be able to start!!! WHOO HOO!! I'm excited bout this! gotta wait till school gets out to have some time to work on it.... (Junior at RC High School, CA) so not too much longer.
#48
Registered User
Join Date: May 2004
Location: Mission Viejo, CA
Posts: 985
Likes: 0
Received 0 Likes
on
0 Posts
I'm thinking you'll need a 12 valve casing. According to what I've read earlier in this post, the P-pump will not mount to the 24 valve casing. Hopefully someone who knows definitively will chime in.
Thread
Thread Starter
Forum
Replies
Last Post
Vaughn MacKenzie
3rd Generation Ram - Non Drivetrain - All Years
12
11-03-2002 07:22 AM