Contractor

While were on the subject, I removed my ring and can hear my turbo better, but it seems alot more noticable when it is cold in the morning. Almost two different pitches as it spools up. From a low howl to a whistle. Does that sound right? Because I sure like the sound. Now I got to get rid of my stock air and install something else that appeals to my ears.<br><br>Cole

Diesel Boy 02

I know what the BHAF is but does anybody know the part number for it at NAPA?

NWDave

It and a few other part numbers are posted in the FAQ but just for you, it's a 2790. <br><br>~Dave

Marine

[quote author=CTD/359 link=board=4;threadid=9991;start=0#95669 date=1043347669]<br>[quote author=Marine link=board=4;threadid=9991;start=0#95648 date=1043345957]<br>I didn't notice much difference and I have the BHAF. It will sound real nice when I invest in the Scotty 4.<br><br>Mike<br>[/quote]<br><br>Scotty IV not Scotty 4<br><br> <br>relax folks...theres no 4/IV<br>there is a 3 coming for the 3rd genners.<br>[/quote]<br><br>dangit, why'd you have to go and ruin all the fun you would have had answering the phones for the new Scotty 4? (oops...I mean Scotty IV)

Diesel Boy 02

I know this might not be the right place to ask this but. I took a buddy of mine's ring out the other night in his 12 valver. We couldnt really tell that much diffrence in the sound. Do you have to run a BHAF air filter to get the air moving threw it? What am I doing wrong? ???

TX Ram

[quote author=Diesel Boy 02 link=board=4;threadid=9991;start=15#96918 date=1043651309]<br>I know this might not be the right place to ask this but. I took a buddy of mine's ring out the other night in his 12 valver. We couldnt really tell that much diffrence in the sound. Do you have to run a BHAF air filter to get the air moving threw it? What am I doing wrong? ???<br>[/quote]<br><br>i could tell a difference with the ring out &amp; stock filter set-up, but most everyone that was in the truck with me didn't notice it. get a bhaf and you'll hear it!

Marine

[quote author=Diesel Boy 02 link=board=4;threadid=9991;start=15#96918 date=1043651309]<br>I know this might not be the right place to ask this but. I took a buddy of mine's ring out the other night in his 12 valver. We couldnt really tell that much diffrence in the sound. Do you have to run a BHAF air filter to get the air moving threw it? What am I doing wrong? ???<br>[/quote]<br><br>The reason is because your friend doesn't have enough valves!<br> <br><br>Mike

Diesel Boy 02

Hey now I only have 12 also. :'(

goldenears

i *tried* to get my ring out the other day......but the snap ring that holds it wouldn't budge.....plus the gap in the snap ring was up at the top of the turbo so it'll be very difficult to get a screwdriver up there. i need somebody with little pixie hands, not my big mitts! What did y'all use to remove that, a snap ring pliers?

phox_mulder

I used two little screwdrivers.<br>A little bigger than the mini eyeglass ones.<br><br>Just lifted it a little at a time with one screwdriver, then jammed the other in there to hold it out while moving the other one around a little more, and so on.<br><br>Once I got enough out to grab with my fingers, it pretty much fell out the rest of the way.<br><br>My mitts are pretty large as well.<br><br>phox

goldenears

Thanks Phox, i'll try again!