Slave cylinder: lone replacement or whole kit?
08-03-2009, 11:03 AM
#1
Registered User
Thread Starter
Slave cylinder: lone replacement or whole kit?
I have found slave cylinders for $25. The entire slave/master kit is available from Dodge for $245. Waiting for Quad4x4 to call back.
Is it ok to replace just the slave or is it advised to replace both with the kit?
Is it ok to replace just the slave or is it advised to replace both with the kit?
08-03-2009, 11:42 AM
#2
Registered User
Thread Starter
Quad does not sell them. SouthBend is $325.
Think I will do the enitre assembly. Who knows, the master may be bad too.
Just going to get the dealer OEM.
Think I will do the enitre assembly. Who knows, the master may be bad too.
Just going to get the dealer OEM.
Thread
Thread Starter
Forum
Replies
Last Post
Gen414
3rd Gen Engine and Drivetrain -> 2003-2007
2
05-07-2009 11:08 AM
cgmorgan06
3rd Gen Engine and Drivetrain -> 2007 and up
3
11-15-2007 04:02 PM
peteygirl
3rd Generation Ram - Non Drivetrain - All Years
0
03-14-2004 09:10 PM
gitchesum
Natl. and Regional Chapters / Special Events
3
01-25-2003 02:08 PM