nv4500 rebuild
#1
Registered User
Thread Starter
Join Date: Jun 2006
Location: Tekamah, Nebraska
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
nv4500 rebuild
I am experiencing problems with my trans falling out of gear in 3rd. pretty sure its my sycno's. I want to rebuild this trans on my own. What i would be asking is if anyone knows a greneral price range its going to cost me. I am going to replace all scyno's 3rd gear gaskets and seals. and also does anyone know where I can buy a repair manual on this transmission. Something that will give me a good break down and show me how to disassemble and re assemble the transmission. Thanks
#2
Registered User
Join Date: Aug 2005
Location: Airdrie, Alberta
Posts: 7,780
Likes: 0
Received 0 Likes
on
0 Posts
#3
just rebuilt my nv4500 about 2 months ago and i ordered the downloadable manual from standardtransmission before i ordered the parts. I wanted to make sure it was a project we could tackle first. The manual was about $20 and showed every part and gave step by step instructions. Total job ran me close to $900 for new input shaft, mainshaft,bearings,seals,5th gear with nut,and oils
Thread
Thread Starter
Forum
Replies
Last Post