Ok, I got a couple of questions that I need a couple answers too. I have read in a couple places about this so called speed limiter wire, the white one with the orange trace on it. I want to cut this wire but I need some instruction on where the best place to do it is. I am gonna route some wires to the cab with a toggle switch so i can keep my cruise when i want it. Another question i have is about getting a boost elbow and boost fooler like the one lister here:

http://www.psdieselproducts.bizland.com/page3.html

I have a Superchips micrtuner and was wondering if that would be of any benefit to me. I also plan on adding some Bosch 275 injectors sometime in the future and figured that the boost fooler would be beneficial there too. I am new to the diesel scene so any advice or suggestions are appreciated. Hope this post is clear enough for you guys to figure out what i am asking.

blueandsilver

 

Come on guys, Somebody has got to know something. I have read your posts, I know there is some smart people on here. Help me out guys.

 

I think before i spent that much money for just a boost fooler i would spend a little more for an EZ. FWIW

 

Cut the wire right where it comes out of the wiring harness on the firewall. Your cruise will still operate normally but what won't work right are your grid heaters. You will want the wire connected during the cold weather months.

Doug