24 Valve Engine and Drivetrain Discuss the 24 Valve engine and drivetrain here. No non-drivetrain discussions please. NO HIGH PERFORMANCE DISCUSSION!

low fuel pressure

Thread Tools
 
Search this Thread
 
Old 12-06-2009, 08:31 AM
  #1  
Registered User
Thread Starter
 
William Johns's Avatar
 
Join Date: Dec 2009
Location: North Carolina
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
low fuel pressure

I have just had installed a Edge Juice/Attitude. It works good on level 1 & 2, but 3,4,5 I get alarm the lift pump pressue is below 4lbs. Has anyone had the same problem? When Edge was installed I had a new OEM lift pump installed also. It idles at 18-21lbs.
Old 12-06-2009, 10:59 AM
  #2  
Registered User
 
johnh's Avatar
 
Join Date: Nov 2002
Location: lyman, utah
Posts: 4,053
Likes: 0
Received 28 Likes on 26 Posts
Originally Posted by William Johns
I have just had installed a Edge Juice/Attitude. It works good on level 1 & 2, but 3,4,5 I get alarm the lift pump pressue is below 4lbs. Has anyone had the same problem? When Edge was installed I had a new OEM lift pump installed also. It idles at 18-21lbs.
if the pressure is 4lbs at wide open throttle, i wouldn't worry about it.... my pressures are about that at WOT and have been for years................ but how many times and how long do you run at WOT? as for me, almost never
Old 12-06-2009, 11:11 AM
  #3  
Registered User
Thread Starter
 
William Johns's Avatar
 
Join Date: Dec 2009
Location: North Carolina
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by johnh
if the pressure is 4lbs at wide open throttle, i wouldn't worry about it.... my pressures are about that at WOT and have been for years................ but how many times and how long do you run at WOT? as for me, almost never
When it drops to 4lbs the Edge unit starts beeping and the chip backs down to a lesser fuel supply so as too protect the Injector pump. (this was Edge techs telling me) They also suggested I ad a Fast Fuel System. When does the money/bleeding stop?
Old 12-06-2009, 01:18 PM
  #4  
Registered User
 
johnh's Avatar
 
Join Date: Nov 2002
Location: lyman, utah
Posts: 4,053
Likes: 0
Received 28 Likes on 26 Posts
Originally Posted by William Johns
When it drops to 4lbs the Edge unit starts beeping and the chip backs down to a lesser fuel supply so as too protect the Injector pump. (this was Edge techs telling me) They also suggested I ad a Fast Fuel System. When does the money/bleeding stop?
when you take the edge off
Old 12-06-2009, 03:07 PM
  #5  
Registered User
 
Copenhagenjunkie's Avatar
 
Join Date: Dec 2001
Location: Saint Ignatius, MT
Posts: 1,246
Received 1 Like on 1 Post
Originally Posted by William Johns
They also suggested I ad a Fast Fuel System. When does the money/bleeding stop?

It's actually called/spelled FASS. There are also other fuel systems to compare to.

My performance wounds are scabed over but now I am going to be bleeding drivetrain and suspension. It never ends .
Old 12-06-2009, 03:39 PM
  #6  
Registered User
 
SIXSLUG's Avatar
 
Join Date: May 2006
Location: Pacific NW, B'ham, Kalispell MT
Posts: 5,572
Received 152 Likes on 131 Posts
I'm wearing the finish off my wallet pulling it out to keep this thing runnin but I really love the truck. I could find something worse to spend it on.

Kurt
Old 12-07-2009, 08:46 PM
  #7  
Registered User
 
turbo2's Avatar
 
Join Date: Mar 2008
Posts: 60
Likes: 0
Received 0 Likes on 0 Posts
OK, so here is a little trick to get that winter diesel to flow at the pressure you would like to see. Add a little Howes to your next tank. Get it at the truck stops this time of year. The big rigs use it. Why does this work? I do not know. Does anybody out there have a theory why this works?
Old 12-07-2009, 08:51 PM
  #8  
Registered User
Thread Starter
 
William Johns's Avatar
 
Join Date: Dec 2009
Location: North Carolina
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Thanks for the Howes suggestion and I will do that, but the temp was in the 60-70 deg range so I think I have other problems
Old 12-08-2009, 10:43 AM
  #9  
Admin Team Leader
 
Lary Ellis (Top)'s Avatar
 
Join Date: May 2002
Posts: 15,514
Received 207 Likes on 158 Posts
OEM lift pumps are JUNK, depending on what model year truck you have.
Old 12-09-2009, 12:18 AM
  #10  
Registered User
 
johnh's Avatar
 
Join Date: Nov 2002
Location: lyman, utah
Posts: 4,053
Likes: 0
Received 28 Likes on 26 Posts
Originally Posted by Lary Ellis (Top)
OEM lift pumps are JUNK, depending on what model year truck you have.
i've been running a campaign pump on the frame for over 100,000 miles with no problems(knock on wood)
Old 12-09-2009, 09:13 AM
  #11  
Registered User
 
sheriffav8r's Avatar
 
Join Date: Sep 2007
Location: Cape Coral, FL
Posts: 1,101
Likes: 0
Received 1 Like on 1 Post
johnh - what is your campaign pump putting out?
Old 12-09-2009, 09:28 PM
  #12  
Registered User
 
johnh's Avatar
 
Join Date: Nov 2002
Location: lyman, utah
Posts: 4,053
Likes: 0
Received 28 Likes on 26 Posts
Originally Posted by sheriffav8r
johnh - what is your campaign pump putting out?
never less than 5psi unless the filter is plugged, which happened this morning (27 below zero)
Name:  P1010160-1.jpg
Views: 91
Size:  44.5 KB
Name:  P1010161-1.jpg
Views: 77
Size:  55.1 KB
Old 12-23-2009, 08:45 PM
  #13  
Registered User
Thread Starter
 
William Johns's Avatar
 
Join Date: Dec 2009
Location: North Carolina
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by William Johns
I have just had installed a Edge Juice/Attitude. It works good on level 1 & 2, but 3,4,5 I get alarm the lift pump pressue is below 4lbs. Has anyone had the same problem? When Edge was installed I had a new OEM lift pump installed also. It idles at 18-21lbs.
I just added a B&D after market fuel pump add on and my fuel pressure does not drop below 10lbs. with my Juice set extreme (5) but it is shuting down because of EGT at 1325deg. I was told that I now need a Bigger Turbo. Do you have any sugestions?
Old 12-23-2009, 10:56 PM
  #14  
Registered User
 
Rattletrap1's Avatar
 
Join Date: Jul 2003
Location: South Bay Area, CA
Posts: 737
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by William Johns
I just added a B&D after market fuel pump add on and my fuel pressure does not drop below 10lbs. with my Juice set extreme (5) but it is shuting down because of EGT at 1325deg. I was told that I now need a Bigger Turbo. Do you have any sugestions?
You could put your foot on a diet. ;-)

Do you have exhaust or intake upgrades? Those can drop your EGT a bit.

how much boost are you pulling?
Old 12-24-2009, 07:17 PM
  #15  
Registered User
Thread Starter
 
William Johns's Avatar
 
Join Date: Dec 2009
Location: North Carolina
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Rattletrap1
You could put your foot on a diet. ;-)

Do you have exhaust or intake upgrades? Those can drop your EGT a bit.

how much boost are you pulling?
Yes I had big air kit and 4" stainless dual exaust (4" to muffler and 2 4" duals out.


Quick Reply: low fuel pressure



All times are GMT -5. The time now is 12:31 PM.