35psitsi

I recently bought an HX-35W but it was missing the exhaust part that has the v-band connected to it. It's the part in the attached picture which bolts to the turbo with 5-bolts and has the v-band connection.

My three questions are;
1. What size is the v-band.
2. Where can I get one new or used?
3. Whats the part number.

35psitsi

Also, does anyone know what years and model that exhaust adapter is used on?

BCSCUMMINS

That doesn’t look like any HX-35 I have ever seen. 35’s don’t have v-bans. Are you sure it is a 35.

35psitsi

It's marked with a holset tag: HX-35W. Either way, I found a way cooler exhaust housing in which I'm going to use from www.htturbo.com . So don't worry about it I guess.

35psitsi

Alright, this new housing (12cm) does NOT fit between my turbo and block so here I am back at square one. Have any of you guys changed your exhaust system before and bought a custom downpipe before? If so, where did you buy it? I'm still looking for this 'holset-only' custom 5-bolt exhaust adapter which come factory on the diesel holsets.

I'm looking for the piece which has 5 bolt holes, to bolt itself to the stock turbo with the v-band on the opposite side. Does anyone know where I can buy one?

Don't you guys do any upgrades here or have one off that you guys can measure. I also need to know the size of the v-band. Thanks in advance.

Rammin On

P/N 3533028 should be around $100 new .. you will also need P/N 3535001 which is the gasket.

Rammin On

V-band P/N 3923060

35psitsi

Thank you. I'm also looking to upgrade my exhaust and was wondering if anyone knows of a place where I can buy that 5-bolt flange in a stainless material so I can weld on a true 3" v-band and extend that for the rest of my exhaust?

NoSeeUm

Non-Wastegated sort of kind of.

These must be newer design.

Jim

JDGnut

Isn't that just an older 35.. that takes the seperate elbow and clamp?? Check out Ebay.. redliner (on ebay) sometimes has them listed..
Bryan

Edit: Opps.. your missing the 5 bolted piece... hhmm.. See them somewhere for sale.. might have also been on ebay...

35psitsi

Ok, let's say hypothetically I found this 5 bolt connector piece with the vband connection and got the v-band and I wanted to upgrade my exhaust. Where can I buy an SS v-band end to bolt to the other side of the stock 5-bolt flanges v-band?

Please help. I'm in such a rut right now.

Need95-00CTD

Alright, here is what you do. Find a junk HX-40 or get one from a junkyard (or even try calling HTT, Piers, or the likes, they may have some extra's they can sell you) and pull the exhaust adapter off of it, the same 5 bolt part that you are looking for, but with a 4" V-clamp on the back of it. It will fit your stock HX-35 housing, but being a bit bigger it will flow better. I noticed a lot quicker spool when I put mine on with a 4" exhaust. The only problem is then you need a 4" downpipe, but since your upgrading exhaust anyways I would go turbo back, with a 4" DP.

I actually have the adapter your looking for off of an HX-40. PM me if you want it, I'll sell it to you cheap, its sitting on my old HX-35, you can buy that from me too if you want.

Need95-00CTD

One more thing, you will need the DP ebow to use a stock exhaust housing with a stock exhaust. Buy a 4" DP (HX-40 style) and the HX-40 Exhaust outlet flange and your set.

cameroneod

^^^^

Cant beat that. Good to see someone from Pacbrake on here.

35psitsi

Alright, I'm going to be completely honest here. I don't drive a Dodge Ram. I drive an Eagle Talon. I put a Holset HX-35 onto my motor and I'm looking for something to work. This is how it sits right now. Pictures are as attached. I'm likely going to get a waterjet place in town to cut me the 316SS flanges for the 5-bolt housing and have a 3" v-band attached to it. It seems to be my only real option.