Holley Pump Users Chime In Please...
#16
Registered User
Join Date: Jun 2007
Location: Waxahachie, TX
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
#17
Registered User
Join Date: May 2006
Location: Imperial, CA
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the link, thats a nice looking setup. I will see how long this new carter lasts, hopfully more than 10k. I have got to start saving for that FASS II, with their warrenty they offer you rreally cant beat it. I just want to put it in and never have to look at the pressure gauge again!
#18
Registered User
Join Date: Feb 2006
Location: Townshend, Vermont
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
I am also using a Holley Blue pump with the Vulcan big line kit. it is a little noisey when you first hit the key, but once the truck is running you never hear it again.
One thing that is real important with the Holley blue pump, and I am sure this is pretty obvious to most on this site, is to make sure you run a GOOD filter right before the pump, I have been told that the Holley pumps absolutely will not tolerate any kind of contaments. So far I love my Holley. 95 bucks brand new, I carry a second for a spare ( Just in case ) I streched the spring just a hair, idles at 18psi, never drops below 14psi at WOT. Best thing is, you can get the Holley pump at just about any parts store in the country.
One thing that is real important with the Holley blue pump, and I am sure this is pretty obvious to most on this site, is to make sure you run a GOOD filter right before the pump, I have been told that the Holley pumps absolutely will not tolerate any kind of contaments. So far I love my Holley. 95 bucks brand new, I carry a second for a spare ( Just in case ) I streched the spring just a hair, idles at 18psi, never drops below 14psi at WOT. Best thing is, you can get the Holley pump at just about any parts store in the country.
#19
Registered User
Join Date: Jun 2004
Location: Windsor, CO
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
I have had a problem with mine over a yr ago. Problem was I fried my LP circuit. I didn't ever use a relay for it. I know it was stupid but it happens and i got over 140,000 miles on my truck before anything happened.
Just make sure you have a relay on it. Since I have done that it has gone a yr no problems at all.
Just make sure you have a relay on it. Since I have done that it has gone a yr no problems at all.
Thread
Thread Starter
Forum
Replies
Last Post
AlCorr
3rd Gen Engine and Drivetrain -> 2003-2007
114
02-11-2009 02:32 AM
91rangerturbo
Performance and Accessories 2nd gen only
15
05-18-2008 11:02 AM
Texaschevelle
Performance and Accessories 2nd gen only
26
11-16-2007 08:08 PM
Vic_Ferrari
3rd Gen High Performance and Accessories (5.9L Only)
12
02-21-2005 06:59 PM