Gauges
#2
Registered User
Hold on to your pants.....
I paid about $350 for my Isspro Fuel Pressure (gauge, SS fuel line, valve and tapped banjo), Pyrometer, Boost gauge and "A" pillar pod. I installed them myself and it took me a good 4 to 5 hours to do it. If you were to pay a shop to do it and their shop rate was $65/hr (I find this to be a typical shop rate in my area) that would be around $300 for the install. So I'd say that about $600 to $650 would be a close guess.
I paid about $350 for my Isspro Fuel Pressure (gauge, SS fuel line, valve and tapped banjo), Pyrometer, Boost gauge and "A" pillar pod. I installed them myself and it took me a good 4 to 5 hours to do it. If you were to pay a shop to do it and their shop rate was $65/hr (I find this to be a typical shop rate in my area) that would be around $300 for the install. So I'd say that about $600 to $650 would be a close guess.
Thread
Thread Starter
Forum
Replies
Last Post
Kman9090
3rd Gen High Performance and Accessories (5.9L Only)
29
12-06-2007 06:43 PM
coontz0473
3rd Gen High Performance and Accessories (5.9L Only)
17
09-22-2006 03:52 PM
estesbubba
3rd Gen High Performance and Accessories (5.9L Only)
6
07-18-2006 04:35 PM
AggiePhil
Performance and Accessories 2nd gen only
2
01-30-2005 01:15 PM