24 Valve Engine and Drivetrain Discuss the 24 Valve engine and drivetrain here. No non-drivetrain discussions please. NO HIGH PERFORMANCE DISCUSSION!

Fass 150 titanium

Thread Tools
 
Search this Thread
 
Old 12-12-2009 | 11:43 AM
  #1  
steamfitter's Avatar
Thread Starter
Registered User
 
Joined: Dec 2009
Posts: 10
Likes: 0
Fass 150 titanium

Just installed fass fuel pump last week. have fuel dripping from old supply line does anyone know if this line needs to be plugged at old line pump. don't know if its just left over fuel from filter housing or theres fuel getting back into the supply from injector pump. does anyone have a diagram of the fuel system on my 01 3500 dually, fuel pump is under the hood not in the tank. Thanx newbie here
Old 12-14-2009 | 01:43 AM
  #2  
HecTiK's Avatar
Registered User
 
Joined: Dec 2007
Posts: 124
Likes: 0
From: Aberdeen, SD
You can take the supply line out, I did. Keep the return on there though...otherwise you will spill fuel all over and possibly short out your fuel sender...
Old 12-14-2009 | 02:11 PM
  #3  
birddoctor's Avatar
Registered User
 
Joined: Jul 2009
Posts: 131
Likes: 0
From: Arkansas
Nothing to worry about.Its just residual fuel from the old lines.You can remove the old LP and filter housing assembly if you want to.
Old 12-15-2009 | 01:59 AM
  #4  
steamfitter's Avatar
Thread Starter
Registered User
 
Joined: Dec 2009
Posts: 10
Likes: 0
thanx for the input
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
3J1&3J2Bill
3rd Gen Engine and Drivetrain -> 2003-2007
1
08-08-2014 10:20 AM
CrashCade
3rd Gen High Performance and Accessories (5.9L Only)
5
12-03-2008 08:58 AM
dodgediesel
3rd Gen High Performance and Accessories (5.9L Only)
26
11-02-2008 01:20 PM
curts99
Performance and Accessories 2nd gen only
5
02-14-2008 01:09 AM
Ramtuff06
3rd Gen High Performance and Accessories (5.9L Only)
10
08-21-2007 07:21 AM




All times are GMT -5. The time now is 03:35 AM.