Dynatrac set up questions
#1
Registered User
Thread Starter
Join Date: Jun 2011
Location: Colorado
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Dynatrac set up questions
I have a 98.5 with the Dynatrac manual fron hubs on it. The rotors need to be replace and I have never taken them apart. We bought the truck with them on it. Does any one know where I can get a manual that will walk me through how to get the apart ? Do I need any special tools? Thanks for the help
#2
Registered User
I believe the Dynatrac is just bearings and hubs.
Your brakes should be factory Dodge brakes.
Is your caliper attached to the hub? If so, it would be typical of free wheel 4WD front hubs, which shouldn't be too hard to track down.
I'd start with Dynatrac's web site...
Your brakes should be factory Dodge brakes.
Is your caliper attached to the hub? If so, it would be typical of free wheel 4WD front hubs, which shouldn't be too hard to track down.
I'd start with Dynatrac's web site...
#4
Registered User
Thread Starter
Join Date: Jun 2011
Location: Colorado
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys
I sent an email to Dynatrac and asked them to send me a copy of the sur guide . I just don't want any surprises once I get itq apart . Thanks again
Thread
Thread Starter
Forum
Replies
Last Post
Lurch519
Performance and Accessories 2nd gen only
8
05-18-2006 08:48 PM
HOHN
Performance and Accessories 2nd gen only
13
02-22-2006 03:37 PM
runamuk
3rd Gen High Performance and Accessories (5.9L Only)
41
02-12-2006 11:17 PM