CEL Codes
#1
Registered User
Thread Starter
Join Date: Jan 2008
Location: Apache Junctiopn AZ
Posts: 450
Likes: 0
Received 0 Likes
on
0 Posts
CEL Codes
Keep getting
P0237 Low input voltage for boost pressure sensor "A" for current engine conditions
P0336 Crankshaft position sensor
Added a Edge about 1 1/2 months ago with out codes.
Changed fuel filter, oil + filter, and air filter and got these codes next day.
New to this stuff, what do I check or fix.
Thanks
P0237 Low input voltage for boost pressure sensor "A" for current engine conditions
P0336 Crankshaft position sensor
Added a Edge about 1 1/2 months ago with out codes.
Changed fuel filter, oil + filter, and air filter and got these codes next day.
New to this stuff, what do I check or fix.
Thanks
#3
Registered User
Thread Starter
Join Date: Jan 2008
Location: Apache Junctiopn AZ
Posts: 450
Likes: 0
Received 0 Likes
on
0 Posts
Ordered a new Crank shaft position sensor. Any room at the Cave Friday or Sat to put it in? Gotta pull the starter does not seem to hard to do but with no garage....
Thanks Scott
Thanks Scott
Thread
Thread Starter
Forum
Replies
Last Post
MrSuzuki
3rd Gen Engine and Drivetrain -> 2007 and up
4
06-16-2009 12:23 AM
boaterman
3rd Gen Engine and Drivetrain -> 2007 and up
12
10-15-2008 10:44 AM
sallyman1
3rd Gen High Performance and Accessories (5.9L Only)
4
08-26-2008 06:20 PM
Hillbilly Delux
3rd Gen High Performance and Accessories (5.9L Only)
3
03-20-2008 05:01 PM