24V P-7100 pump conversion
Today, 12:13 PM
#1
24V P-7100 pump conversion
I have a 2001 Quad Cab 2500 2WD 5.9L w/NV5600. It has some rust issues. And now that a 2008 Ford F350 is done and back on the road after almost 2 years, it is the Rams turn.
I am struggling with doing an off frame with this truck or pulling the Drivetrain and Powertrain out and put it all in a 1st Gen.
My reason for this post is to get information, pros & cons and REAL ACCURATE results of doing a P-7100 conversion.
I need knowledgeable people who actually did the work, and currently use the truck it was done to.
If you are one that pays someone else for all the work done to your truck, not to be rude, but you are not going to be much help.
My figures for this looks to be approximately $5000 plus for this conversation, using a reputable kit and a reputable company for the P7100 pump.
Thank you, and looking forward to hearing about this.
I am struggling with doing an off frame with this truck or pulling the Drivetrain and Powertrain out and put it all in a 1st Gen.
My reason for this post is to get information, pros & cons and REAL ACCURATE results of doing a P-7100 conversion.
I need knowledgeable people who actually did the work, and currently use the truck it was done to.
If you are one that pays someone else for all the work done to your truck, not to be rude, but you are not going to be much help.
My figures for this looks to be approximately $5000 plus for this conversation, using a reputable kit and a reputable company for the P7100 pump.
Thank you, and looking forward to hearing about this.
Today, 12:28 PM
#2
Registered User
I just called you and left a message.
Thread
Thread Starter
Forum
Replies
Last Post
SilverHoss99
Performance and Accessories 2nd gen only
5
03-22-2006 03:24 PM